commit 282aeb477a10d09cc5c4d73c54bb996964723f96 Author: Greg Kroah-Hartman Date: Wed Feb 10 09:09:27 2021 +0100 Linux 4.9.257 Tested-by: Florian Fainelli Tested-by: Shuah Khan Tested-by: Linux Kernel Functional Testing Tested-by: Igor Matheus Andrade Torrente Tested-by: Jason Self Tested-by: Guenter Roeck Tested-by: Ross Schmidt Link: https://lore.kernel.org/r/20210208145810.230485165@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman commit efb6fba8d6dea6b506e7901de1885244f8d5d9e9 Author: Shih-Yuan Lee (FourDollars) Date: Mon Jul 3 14:13:29 2017 +0800 ALSA: hda/realtek - Fix typo of pincfg for Dell quirk commit b4576de87243c32fab50dda9f8eba1e3cf13a7e2 upstream. The PIN number for Dell headset mode of ALC3271 is wrong. Fixes: fcc6c877a01f ("ALSA: hda/realtek - Support Dell headset mode for ALC3271") Signed-off-by: Shih-Yuan Lee (FourDollars) Signed-off-by: Takashi Iwai Signed-off-by: Greg Kroah-Hartman commit 14e849336f40fcac71020c3e12e50d6bf4248e32 Author: Nadav Amit Date: Wed Jan 27 09:53:17 2021 -0800 iommu/vt-d: Do not use flush-queue when caching-mode is on commit 29b32839725f8c89a41cb6ee054c85f3116ea8b5 upstream. When an Intel IOMMU is virtualized, and a physical device is passed-through to the VM, changes of the virtual IOMMU need to be propagated to the physical IOMMU. The hypervisor therefore needs to monitor PTE mappings in the IOMMU page-tables. Intel specifications provide "caching-mode" capability that a virtual IOMMU uses to report that the IOMMU is virtualized and a TLB flush is needed after mapping to allow the hypervisor to propagate virtual IOMMU mappings to the physical IOMMU. To the best of my knowledge no real physical IOMMU reports "caching-mode" as turned on. Synchronizing the virtual and the physical IOMMU tables is expensive if the hypervisor is unaware which PTEs have changed, as the hypervisor is required to walk all the virtualized tables and look for changes. Consequently, domain flushes are much more expensive than page-specific flushes on virtualized IOMMUs with passthrough devices. The kernel therefore exploited the "caching-mode" indication to avoid domain flushing and use page-specific flushing in virtualized environments. See commit 78d5f0f500e6 ("intel-iommu: Avoid global flushes with caching mode.") This behavior changed after commit 13cf01744608 ("iommu/vt-d: Make use of iova deferred flushing"). Now, when batched TLB flushing is used (the default), full TLB domain flushes are performed frequently, requiring the hypervisor to perform expensive synchronization between the virtual TLB and the physical one. Getting batched TLB flushes to use page-specific invalidations again in such circumstances is not easy, since the TLB invalidation scheme assumes that "full" domain TLB flushes are performed for scalability. Disable batched TLB flushes when caching-mode is on, as the performance benefit from using batched TLB invalidations is likely to be much smaller than the overhead of the virtual-to-physical IOMMU page-tables synchronization. Fixes: 13cf01744608 ("iommu/vt-d: Make use of iova deferred flushing") Signed-off-by: Nadav Amit Cc: David Woodhouse Cc: Lu Baolu Cc: Joerg Roedel Cc: Will Deacon Cc: stable@vger.kernel.org Acked-by: Lu Baolu Link: https://lore.kernel.org/r/20210127175317.1600473-1-namit@vmware.com Signed-off-by: Joerg Roedel Signed-off-by: Nadav Amit Signed-off-by: Greg Kroah-Hartman commit 53e37f9950b3fc833bc7b0e01ba65262b2fa9d25 Author: Rafael J. Wysocki Date: Thu Jan 14 19:34:22 2021 +0100 ACPI: thermal: Do not call acpi_thermal_check() directly commit 81b704d3e4674e09781d331df73d76675d5ad8cb upstream. Calling acpi_thermal_check() from acpi_thermal_notify() directly is problematic if _TMP triggers Notify () on the thermal zone for which it has been evaluated (which happens on some systems), because it causes a new acpi_thermal_notify() invocation to be queued up every time and if that takes place too often, an indefinite number of pending work items may accumulate in kacpi_notify_wq over time. Besides, it is not really useful to queue up a new invocation of acpi_thermal_check() if one of them is pending already. For these reasons, rework acpi_thermal_notify() to queue up a thermal check instead of calling acpi_thermal_check() directly and only allow one thermal check to be pending at a time. Moreover, only allow one acpi_thermal_check_fn() instance at a time to run thermal_zone_device_update() for one thermal zone and make it return early if it sees other instances running for the same thermal zone. While at it, fold acpi_thermal_check() into acpi_thermal_check_fn(), as it is only called from there after the other changes made here. [This issue appears to have been exposed by commit 6d25be5782e4 ("sched/core, workqueues: Distangle worker accounting from rq lock"), but it is unclear why it was not visible earlier.] BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=208877 Reported-by: Stephen Berman Diagnosed-by: Sebastian Andrzej Siewior Signed-off-by: Rafael J. Wysocki Reviewed-by: Sebastian Andrzej Siewior Tested-by: Stephen Berman Cc: All applicable [bigeasy: Backported to v4.9.y, use atomic_t instead of refcount_t] Signed-off-by: Sebastian Andrzej Siewior Signed-off-by: Greg Kroah-Hartman commit 00717a9de7cda4a0aaa1af184dd694c8d633df48 Author: Benjamin Valentin Date: Thu Jan 21 19:24:17 2021 -0800 Input: xpad - sync supported devices with fork on GitHub commit 9bbd77d5bbc9aff8cb74d805c31751f5f0691ba8 upstream. There is a fork of this driver on GitHub [0] that has been updated with new device IDs. Merge those into the mainline driver, so the out-of-tree fork is not needed for users of those devices anymore. [0] https://github.com/paroj/xpad Signed-off-by: Benjamin Valentin Link: https://lore.kernel.org/r/20210121142523.1b6b050f@rechenknecht2k11 Signed-off-by: Dmitry Torokhov Signed-off-by: Greg Kroah-Hartman commit 8cc3e209628bcbe352246bec1bc2d28196023549 Author: Dave Hansen Date: Thu Mar 5 09:47:08 2020 -0800 x86/apic: Add extra serialization for non-serializing MSRs commit 25a068b8e9a4eb193d755d58efcb3c98928636e0 upstream. Jan Kiszka reported that the x2apic_wrmsr_fence() function uses a plain MFENCE while the Intel SDM (10.12.3 MSR Access in x2APIC Mode) calls for MFENCE; LFENCE. Short summary: we have special MSRs that have weaker ordering than all the rest. Add fencing consistent with current SDM recommendations. This is not known to cause any issues in practice, only in theory. Longer story below: The reason the kernel uses a different semantic is that the SDM changed (roughly in late 2017). The SDM changed because folks at Intel were auditing all of the recommended fences in the SDM and realized that the x2apic fences were insufficient. Why was the pain MFENCE judged insufficient? WRMSR itself is normally a serializing instruction. No fences are needed because the instruction itself serializes everything. But, there are explicit exceptions for this serializing behavior written into the WRMSR instruction documentation for two classes of MSRs: IA32_TSC_DEADLINE and the X2APIC MSRs. Back to x2apic: WRMSR is *not* serializing in this specific case. But why is MFENCE insufficient? MFENCE makes writes visible, but only affects load/store instructions. WRMSR is unfortunately not a load/store instruction and is unaffected by MFENCE. This means that a non-serializing WRMSR could be reordered by the CPU to execute before the writes made visible by the MFENCE have even occurred in the first place. This means that an x2apic IPI could theoretically be triggered before there is any (visible) data to process. Does this affect anything in practice? I honestly don't know. It seems quite possible that by the time an interrupt gets to consume the (not yet) MFENCE'd data, it has become visible, mostly by accident. To be safe, add the SDM-recommended fences for all x2apic WRMSRs. This also leaves open the question of the _other_ weakly-ordered WRMSR: MSR_IA32_TSC_DEADLINE. While it has the same ordering architecture as the x2APIC MSRs, it seems substantially less likely to be a problem in practice. While writes to the in-memory Local Vector Table (LVT) might theoretically be reordered with respect to a weakly-ordered WRMSR like TSC_DEADLINE, the SDM has this to say: In x2APIC mode, the WRMSR instruction is used to write to the LVT entry. The processor ensures the ordering of this write and any subsequent WRMSR to the deadline; no fencing is required. But, that might still leave xAPIC exposed. The safest thing to do for now is to add the extra, recommended LFENCE. [ bp: Massage commit message, fix typos, drop accidentally added newline to tools/arch/x86/include/asm/barrier.h. ] Reported-by: Jan Kiszka Signed-off-by: Dave Hansen Signed-off-by: Borislav Petkov Acked-by: Peter Zijlstra (Intel) Acked-by: Thomas Gleixner Cc: Link: https://lkml.kernel.org/r/20200305174708.F77040DD@viggo.jf.intel.com Signed-off-by: Greg Kroah-Hartman commit 7175b118978c97bba5286c3c58361fbba312fcbf Author: Josh Poimboeuf Date: Thu Jan 28 15:52:19 2021 -0600 x86/build: Disable CET instrumentation in the kernel commit 20bf2b378729c4a0366a53e2018a0b70ace94bcd upstream. With retpolines disabled, some configurations of GCC, and specifically the GCC versions 9 and 10 in Ubuntu will add Intel CET instrumentation to the kernel by default. That breaks certain tracing scenarios by adding a superfluous ENDBR64 instruction before the fentry call, for functions which can be called indirectly. CET instrumentation isn't currently necessary in the kernel, as CET is only supported in user space. Disable it unconditionally and move it into the x86's Makefile as CET/CFI... enablement should be a per-arch decision anyway. [ bp: Massage and extend commit message. ] Fixes: 29be86d7f9cb ("kbuild: add -fcf-protection=none when using retpoline flags") Reported-by: Nikolay Borisov Signed-off-by: Josh Poimboeuf Signed-off-by: Borislav Petkov Reviewed-by: Nikolay Borisov Tested-by: Nikolay Borisov Cc: Cc: Seth Forshee Cc: Masahiro Yamada Link: https://lkml.kernel.org/r/20210128215219.6kct3h2eiustncws@treble Signed-off-by: Greg Kroah-Hartman commit 332293a2301fde82bc41b359f870a96871764aaa Author: Hugh Dickins Date: Thu Feb 4 18:32:31 2021 -0800 mm: thp: fix MADV_REMOVE deadlock on shmem THP commit 1c2f67308af4c102b4e1e6cd6f69819ae59408e0 upstream. Sergey reported deadlock between kswapd correctly doing its usual lock_page(page) followed by down_read(page->mapping->i_mmap_rwsem), and madvise(MADV_REMOVE) on an madvise(MADV_HUGEPAGE) area doing down_write(page->mapping->i_mmap_rwsem) followed by lock_page(page). This happened when shmem_fallocate(punch hole)'s unmap_mapping_range() reaches zap_pmd_range()'s call to __split_huge_pmd(). The same deadlock could occur when partially truncating a mapped huge tmpfs file, or using fallocate(FALLOC_FL_PUNCH_HOLE) on it. __split_huge_pmd()'s page lock was added in 5.8, to make sure that any concurrent use of reuse_swap_page() (holding page lock) could not catch the anon THP's mapcounts and swapcounts while they were being split. Fortunately, reuse_swap_page() is never applied to a shmem or file THP (not even by khugepaged, which checks PageSwapCache before calling), and anonymous THPs are never created in shmem or file areas: so that __split_huge_pmd()'s page lock can only be necessary for anonymous THPs, on which there is no risk of deadlock with i_mmap_rwsem. Link: https://lkml.kernel.org/r/alpine.LSU.2.11.2101161409470.2022@eggly.anvils Fixes: c444eb564fb1 ("mm: thp: make the THP mapcount atomic against __split_huge_pmd_locked()") Signed-off-by: Hugh Dickins Reported-by: Sergey Senozhatsky Reviewed-by: Andrea Arcangeli Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman commit 2a2e1e97098604155720938331c224180b015470 Author: Muchun Song Date: Thu Feb 4 18:32:13 2021 -0800 mm: hugetlb: remove VM_BUG_ON_PAGE from page_huge_active commit ecbf4724e6061b4b01be20f6d797d64d462b2bc8 upstream. The page_huge_active() can be called from scan_movable_pages() which do not hold a reference count to the HugeTLB page. So when we call page_huge_active() from scan_movable_pages(), the HugeTLB page can be freed parallel. Then we will trigger a BUG_ON which is in the page_huge_active() when CONFIG_DEBUG_VM is enabled. Just remove the VM_BUG_ON_PAGE. Link: https://lkml.kernel.org/r/20210115124942.46403-6-songmuchun@bytedance.com Fixes: 7e1f049efb86 ("mm: hugetlb: cleanup using paeg_huge_active()") Signed-off-by: Muchun Song Reviewed-by: Mike Kravetz Acked-by: Michal Hocko Reviewed-by: Oscar Salvador Cc: David Hildenbrand Cc: Yang Shi Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman commit 1ed62140ac553a256af112199a92aecd2da432aa Author: Muchun Song Date: Thu Feb 4 18:32:10 2021 -0800 mm: hugetlb: fix a race between isolating and freeing page commit 0eb2df2b5629794020f75e94655e1994af63f0d4 upstream. There is a race between isolate_huge_page() and __free_huge_page(). CPU0: CPU1: if (PageHuge(page)) put_page(page) __free_huge_page(page) spin_lock(&hugetlb_lock) update_and_free_page(page) set_compound_page_dtor(page, NULL_COMPOUND_DTOR) spin_unlock(&hugetlb_lock) isolate_huge_page(page) // trigger BUG_ON VM_BUG_ON_PAGE(!PageHead(page), page) spin_lock(&hugetlb_lock) page_huge_active(page) // trigger BUG_ON VM_BUG_ON_PAGE(!PageHuge(page), page) spin_unlock(&hugetlb_lock) When we isolate a HugeTLB page on CPU0. Meanwhile, we free it to the buddy allocator on CPU1. Then, we can trigger a BUG_ON on CPU0, because it is already freed to the buddy allocator. Link: https://lkml.kernel.org/r/20210115124942.46403-5-songmuchun@bytedance.com Fixes: c8721bbbdd36 ("mm: memory-hotplug: enable memory hotplug to handle hugepage") Signed-off-by: Muchun Song Reviewed-by: Mike Kravetz Acked-by: Michal Hocko Reviewed-by: Oscar Salvador Cc: David Hildenbrand Cc: Yang Shi Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman commit 2dd160c9886d564d6c6321ca468ecec85744de8e Author: Muchun Song Date: Thu Feb 4 18:32:03 2021 -0800 mm: hugetlbfs: fix cannot migrate the fallocated HugeTLB page commit 585fc0d2871c9318c949fbf45b1f081edd489e96 upstream. If a new hugetlb page is allocated during fallocate it will not be marked as active (set_page_huge_active) which will result in a later isolate_huge_page failure when the page migration code would like to move that page. Such a failure would be unexpected and wrong. Only export set_page_huge_active, just leave clear_page_huge_active as static. Because there are no external users. Link: https://lkml.kernel.org/r/20210115124942.46403-3-songmuchun@bytedance.com Fixes: 70c3547e36f5 (hugetlbfs: add hugetlbfs_fallocate()) Signed-off-by: Muchun Song Acked-by: Michal Hocko Reviewed-by: Mike Kravetz Reviewed-by: Oscar Salvador Cc: David Hildenbrand Cc: Yang Shi Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman commit 137482a0e50e18aa9d5d75edc355146727e0dbc8 Author: Russell King Date: Sun Oct 18 09:39:21 2020 +0100 ARM: footbridge: fix dc21285 PCI configuration accessors commit 39d3454c3513840eb123b3913fda6903e45ce671 upstream. Building with gcc 4.9.2 reveals a latent bug in the PCI accessors for Footbridge platforms, which causes a fatal alignment fault while accessing IO memory. Fix this by making the assembly volatile. Cc: stable@vger.kernel.org Signed-off-by: Russell King Signed-off-by: Greg Kroah-Hartman commit 0c1b6b22fdac7344ea7dd318e6d071dc23da836e Author: Fengnan Chang Date: Sat Jan 23 11:32:31 2021 +0800 mmc: core: Limit retries when analyse of SDIO tuples fails commit f92e04f764b86e55e522988e6f4b6082d19a2721 upstream. When analysing tuples fails we may loop indefinitely to retry. Let's avoid this by using a 10s timeout and bail if not completed earlier. Signed-off-by: Fengnan Chang Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20210123033230.36442-1-fengnanchang@gmail.com Signed-off-by: Ulf Hansson Signed-off-by: Greg Kroah-Hartman commit 57659a80d5278d12bf7fd4f1d0b78e44a36f0d34 Author: Aurelien Aptel Date: Fri Feb 5 15:42:48 2021 +0100 cifs: report error instead of invalid when revalidating a dentry fails commit 21b200d091826a83aafc95d847139b2b0582f6d1 upstream. Assuming - //HOST/a is mounted on /mnt - //HOST/b is mounted on /mnt/b On a slow connection, running 'df' and killing it while it's processing /mnt/b can make cifs_get_inode_info() returns -ERESTARTSYS. This triggers the following chain of events: => the dentry revalidation fail => dentry is put and released => superblock associated with the dentry is put => /mnt/b is unmounted This patch makes cifs_d_revalidate() return the error instead of 0 (invalid) when cifs_revalidate_dentry() fails, except for ENOENT (file deleted) and ESTALE (file recreated). Signed-off-by: Aurelien Aptel Suggested-by: Shyam Prasad N Reviewed-by: Shyam Prasad N CC: stable@vger.kernel.org Signed-off-by: Steve French Signed-off-by: Greg Kroah-Hartman commit 9d9f8bb2fa25bc4fb7271de3bbe289ba82864273 Author: Mathias Nyman Date: Wed Feb 3 13:37:02 2021 +0200 xhci: fix bounce buffer usage for non-sg list case commit d4a610635400ccc382792f6be69427078541c678 upstream. xhci driver may in some special cases need to copy small amounts of payload data to a bounce buffer in order to meet the boundary and alignment restrictions set by the xHCI specification. In the majority of these cases the data is in a sg list, and driver incorrectly assumed data is always in urb->sg when using the bounce buffer. If data instead is contiguous, and in urb->transfer_buffer, we may still need to bounce buffer a small part if data starts very close (less than packet size) to a 64k boundary. Check if sg list is used before copying data to/from it. Fixes: f9c589e142d0 ("xhci: TD-fragment, align the unsplittable case with a bounce buffer") Cc: stable@vger.kernel.org Reported-by: Andreas Hartmann Tested-by: Andreas Hartmann Signed-off-by: Mathias Nyman Link: https://lore.kernel.org/r/20210203113702.436762-2-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman Signed-off-by: Greg Kroah-Hartman commit 87ab5651175e27fc1314840b42b8a00ef009883f Author: Wang ShaoBo Date: Thu Jan 28 20:44:27 2021 +0800 kretprobe: Avoid re-registration of the same kretprobe earlier commit 0188b87899ffc4a1d36a0badbe77d56c92fd91dc upstream. Our system encountered a re-init error when re-registering same kretprobe, where the kretprobe_instance in rp->free_instances is illegally accessed after re-init. Implementation to avoid re-registration has been introduced for kprobe before, but lags for register_kretprobe(). We must check if kprobe has been re-registered before re-initializing kretprobe, otherwise it will destroy the data struct of kretprobe registered, which can lead to memory leak, system crash, also some unexpected behaviors. We use check_kprobe_rereg() to check if kprobe has been re-registered before running register_kretprobe()'s body, for giving a warning message and terminate registration process. Link: https://lkml.kernel.org/r/20210128124427.2031088-1-bobo.shaobowang@huawei.com Cc: stable@vger.kernel.org Fixes: 1f0ab40976460 ("kprobes: Prevent re-registration of the same kprobe") [ The above commit should have been done for kretprobes too ] Acked-by: Naveen N. Rao Acked-by: Ananth N Mavinakayanahalli Acked-by: Masami Hiramatsu Signed-off-by: Wang ShaoBo Signed-off-by: Cheng Jian Signed-off-by: Steven Rostedt (VMware) Signed-off-by: Greg Kroah-Hartman commit 2718d6e8d6a684b4141df3d51c6946996fa9e864 Author: Felix Fietkau Date: Mon Feb 1 09:33:24 2021 +0100 mac80211: fix station rate table updates on assoc commit 18fe0fae61252b5ae6e26553e2676b5fac555951 upstream. If the driver uses .sta_add, station entries are only uploaded after the sta is in assoc state. Fix early station rate table updates by deferring them until the sta has been uploaded. Cc: stable@vger.kernel.org Signed-off-by: Felix Fietkau Link: https://lore.kernel.org/r/20210201083324.3134-1-nbd@nbd.name [use rcu_access_pointer() instead since we won't dereference here] Signed-off-by: Johannes Berg Signed-off-by: Greg Kroah-Hartman commit a3bcb11eba63b1fd0fd6683afabe284bb2e250e9 Author: Heiko Stuebner Date: Wed Jan 27 11:39:19 2021 +0100 usb: dwc2: Fix endpoint direction check in ep_from_windex commit f670e9f9c8cac716c3506c6bac9e997b27ad441a upstream. dwc2_hsotg_process_req_status uses ep_from_windex() to retrieve the endpoint for the index provided in the wIndex request param. In a test-case with a rndis gadget running and sending a malformed packet to it like: dev.ctrl_transfer( 0x82, # bmRequestType 0x00, # bRequest 0x0000, # wValue 0x0001, # wIndex 0x00 # wLength ) it is possible to cause a crash: [ 217.533022] dwc2 ff300000.usb: dwc2_hsotg_process_req_status: USB_REQ_GET_STATUS [ 217.559003] Unable to handle kernel read from unreadable memory at virtual address 0000000000000088 ... [ 218.313189] Call trace: [ 218.330217] ep_from_windex+0x3c/0x54 [ 218.348565] usb_gadget_giveback_request+0x10/0x20 [ 218.368056] dwc2_hsotg_complete_request+0x144/0x184 This happens because ep_from_windex wants to compare the endpoint direction even if index_to_ep() didn't return an endpoint due to the direction not matching. The fix is easy insofar that the actual direction check is already happening when calling index_to_ep() which will return NULL if there is no endpoint for the targeted direction, so the offending check can go away completely. Fixes: c6f5c050e2a7 ("usb: dwc2: gadget: add bi-directional endpoint support") Cc: stable@vger.kernel.org Reported-by: Gerhard Klostermeier Signed-off-by: Heiko Stuebner Link: https://lore.kernel.org/r/20210127103919.58215-1-heiko@sntech.de Signed-off-by: Greg Kroah-Hartman commit b76c2952453c408ab79c082a848678c743eb95a5 Author: Jeremy Figgins Date: Sat Jan 23 18:21:36 2021 -0600 USB: usblp: don't call usb_set_interface if there's a single alt commit d8c6edfa3f4ee0d45d7ce5ef18d1245b78774b9d upstream. Some devices, such as the Winbond Electronics Corp. Virtual Com Port (Vendor=0416, ProdId=5011), lockup when usb_set_interface() or usb_clear_halt() are called. This device has only a single altsetting, so it should not be necessary to call usb_set_interface(). Acked-by: Pete Zaitcev Signed-off-by: Jeremy Figgins Link: https://lore.kernel.org/r/YAy9kJhM/rG8EQXC@watson Cc: stable Signed-off-by: Greg Kroah-Hartman commit ccdc62f46b8e4bf7f55e65eab5671e8dd593987d Author: Dan Carpenter Date: Thu Jan 28 12:33:42 2021 +0300 USB: gadget: legacy: fix an error code in eth_bind() commit 3e1f4a2e1184ae6ad7f4caf682ced9554141a0f4 upstream. This code should return -ENOMEM if the allocation fails but it currently returns success. Fixes: 9b95236eebdb ("usb: gadget: ether: allocate and init otg descriptor by otg capabilities") Signed-off-by: Dan Carpenter Link: https://lore.kernel.org/r/YBKE9rqVuJEOUWpW@mwanda Cc: stable Signed-off-by: Greg Kroah-Hartman commit f54be213e213e93a780fde5e383acc021ec3f781 Author: Arnd Bergmann Date: Fri Dec 11 13:36:46 2020 -0800 elfcore: fix building with clang commit 6e7b64b9dd6d96537d816ea07ec26b7dedd397b9 upstream. kernel/elfcore.c only contains weak symbols, which triggers a bug with clang in combination with recordmcount: Cannot find symbol for section 2: .text. kernel/elfcore.o: failed Move the empty stubs into linux/elfcore.h as inline functions. As only two architectures use these, just use the architecture specific Kconfig symbols to key off the declaration. Link: https://lkml.kernel.org/r/20201204165742.3815221-2-arnd@kernel.org Signed-off-by: Arnd Bergmann Cc: Nathan Chancellor Cc: Nick Desaulniers Cc: Barret Rhoden Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman commit 36b509283ae293aaacccaa47aa729fbd5a7e83a5 Author: Xie He Date: Sun Jan 31 21:57:06 2021 -0800 net: lapb: Copy the skb before sending a packet [ Upstream commit 88c7a9fd9bdd3e453f04018920964c6f848a591a ] When sending a packet, we will prepend it with an LAPB header. This modifies the shared parts of a cloned skb, so we should copy the skb rather than just clone it, before we prepend the header. In "Documentation/networking/driver.rst" (the 2nd point), it states that drivers shouldn't modify the shared parts of a cloned skb when transmitting. The "dev_queue_xmit_nit" function in "net/core/dev.c", which is called when an skb is being sent, clones the skb and sents the clone to AF_PACKET sockets. Because the LAPB drivers first remove a 1-byte pseudo-header before handing over the skb to us, if we don't copy the skb before prepending the LAPB header, the first byte of the packets received on AF_PACKET sockets can be corrupted. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Xie He Acked-by: Martin Schiller Link: https://lore.kernel.org/r/20210201055706.415842-1-xie.he.0141@gmail.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit 8f25a45a217193af55a87b0fe4f9f8514ed29812 Author: Alexey Dobriyan Date: Sun Jan 3 17:59:51 2021 -0800 Input: i8042 - unbreak Pegatron C15B [ Upstream commit a3a9060ecad030e2c7903b2b258383d2c716b56c ] g++ reports drivers/input/serio/i8042-x86ia64io.h:225:3: error: ‘.matches’ designator used multiple times in the same initializer list C99 semantics is that last duplicated initialiser wins, so DMI entry gets overwritten. Fixes: a48491c65b51 ("Input: i8042 - add ByteSpeed touchpad to noloop table") Signed-off-by: Alexey Dobriyan Acked-by: Po-Hsu Lin Link: https://lore.kernel.org/r/20201228072335.GA27766@localhost.localdomain Signed-off-by: Dmitry Torokhov Signed-off-by: Sasha Levin commit f0df5378de13a240721106f802c9869adda4839b Author: Christoph Schemmel Date: Wed Jan 27 20:58:46 2021 +0100 USB: serial: option: Adding support for Cinterion MV31 commit e478d6029dca9d8462f426aee0d32896ef64f10f upstream. Adding support for Cinterion device MV31 for enumeration with PID 0x00B3 and 0x00B7. usb-devices output for 0x00B3 T: Bus=04 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 6 Spd=5000 MxCh= 0 D: Ver= 3.20 Cls=ef(misc ) Sub=02 Prot=01 MxPS= 9 #Cfgs= 1 P: Vendor=1e2d ProdID=00b3 Rev=04.14 S: Manufacturer=Cinterion S: Product=Cinterion PID 0x00B3 USB Mobile Broadband S: SerialNumber=b3246eed C: #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=896mA I: If#=0x0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim I: If#=0x1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim I: If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x3 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=ff Driver=cdc_wdm I: If#=0x4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option usb-devices output for 0x00B7 T: Bus=04 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 5 Spd=5000 MxCh= 0 D: Ver= 3.20 Cls=ef(misc ) Sub=02 Prot=01 MxPS= 9 #Cfgs= 1 P: Vendor=1e2d ProdID=00b7 Rev=04.14 S: Manufacturer=Cinterion S: Product=Cinterion PID 0x00B3 USB Mobile Broadband S: SerialNumber=b3246eed C: #Ifs= 4 Cfg#= 1 Atr=a0 MxPwr=896mA I: If#=0x0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan I: If#=0x1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option Signed-off-by: Christoph Schemmel Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman commit 0aa6b8669e9647ffdb87d8cbb5bb9d9ca974acb7 Author: Chenxin Jin Date: Wed Jan 13 16:59:05 2021 +0800 USB: serial: cp210x: add new VID/PID for supporting Teraoka AD2000 commit 43377df70480f82919032eb09832e9646a8a5efb upstream. Teraoka AD2000 uses the CP210x driver, but the chip VID/PID is customized with 0988/0578. We need the driver to support the new VID/PID. Signed-off-by: Chenxin Jin Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman commit 3800d7b5f56c0f4f32c8e5d194ca48e00c9f308c Author: Pho Tran Date: Mon Jan 25 09:26:54 2021 +0000 USB: serial: cp210x: add pid/vid for WSDA-200-USB commit 3c4f6ecd93442f4376a58b38bb40ee0b8c46e0e6 upstream. Information pid/vid of WSDA-200-USB, Lord corporation company: vid: 199b pid: ba30 Signed-off-by: Pho Tran [ johan: amend comment with product name ] Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman commit 42efb098c75f9d4b95f7cf35d3d52e80cc2fde82 Author: Sasha Levin Date: Fri Feb 5 12:47:02 2021 -0500 stable: clamp SUBLEVEL in 4.4 and 4.9 Right now SUBLEVEL is overflowing, and some userspace may start treating 4.9.256 as 4.10. While out of tree modules have different ways of extracting the version number (and we're generally ok with breaking them), we do care about breaking userspace and it would appear that this overflow might do just that. Our rules around userspace ABI in the stable kernel are pretty simple: we don't break it. Thus, while userspace may be checking major/minor, it shouldn't be doing anything with sublevel. This patch applies a big band-aid to the 4.9 and 4.4 kernels in the form of clamping their sublevel to 255. The clamp is done for the purpose of LINUX_VERSION_CODE only, and extracting the version number from the Makefile or "make kernelversion" will continue to work as intended. We might need to do it later in newer trees, but maybe we'll have a better solution by then, so I'm ignoring that problem for now. Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit a35b3e57a978251ecc8d8d9a7d079eea16b7c3f7 Author: Josh Poimboeuf Date: Thu Jan 14 16:14:01 2021 -0600 objtool: Don't fail on missing symbol table [ Upstream commit 1d489151e9f9d1647110277ff77282fe4d96d09b ] Thanks to a recent binutils change which doesn't generate unused symbols, it's now possible for thunk_64.o be completely empty without CONFIG_PREEMPTION: no text, no data, no symbols. We could edit the Makefile to only build that file when CONFIG_PREEMPTION is enabled, but that will likely create confusion if/when the thunks end up getting used by some other code again. Just ignore it and move on. Reported-by: Nathan Chancellor Reviewed-by: Nathan Chancellor Reviewed-by: Miroslav Benes Tested-by: Nathan Chancellor Link: https://github.com/ClangBuiltLinux/linux/issues/1254 Signed-off-by: Josh Poimboeuf Signed-off-by: Sasha Levin commit fb6c463ef441cc6cf73899d784f430ccd1ae4283 Author: Brian King Date: Tue Jan 12 09:06:38 2021 -0600 scsi: ibmvfc: Set default timeout to avoid crash during migration [ Upstream commit 764907293edc1af7ac857389af9dc858944f53dc ] While testing live partition mobility, we have observed occasional crashes of the Linux partition. What we've seen is that during the live migration, for specific configurations with large amounts of memory, slow network links, and workloads that are changing memory a lot, the partition can end up being suspended for 30 seconds or longer. This resulted in the following scenario: CPU 0 CPU 1 ------------------------------- ---------------------------------- scsi_queue_rq migration_store -> blk_mq_start_request -> rtas_ibm_suspend_me -> blk_add_timer -> on_each_cpu(rtas_percpu_suspend_me _______________________________________V | V -> IPI from CPU 1 -> rtas_percpu_suspend_me -> __rtas_suspend_last_cpu -- Linux partition suspended for > 30 seconds -- -> for_each_online_cpu(cpu) plpar_hcall_norets(H_PROD -> scsi_dispatch_cmd -> scsi_times_out -> scsi_abort_command -> queue_delayed_work -> ibmvfc_queuecommand_lck -> ibmvfc_send_event -> ibmvfc_send_crq - returns H_CLOSED <- returns SCSI_MLQUEUE_HOST_BUSY -> __blk_mq_requeue_request -> scmd_eh_abort_handler -> scsi_try_to_abort_cmd - returns SUCCESS -> scsi_queue_insert Normally, the SCMD_STATE_COMPLETE bit would protect against the command completion and the timeout, but that doesn't work here, since we don't check that at all in the SCSI_MLQUEUE_HOST_BUSY path. In this case we end up calling scsi_queue_insert on a request that has already been queued, or possibly even freed, and we crash. The patch below simply increases the default I/O timeout to avoid this race condition. This is also the timeout value that nearly all IBM SAN storage recommends setting as the default value. Link: https://lore.kernel.org/r/1610463998-19791-1-git-send-email-brking@linux.vnet.ibm.com Signed-off-by: Brian King Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin commit 3fb9aa619423539b21dc6801075411f57cd40dd0 Author: Felix Fietkau Date: Fri Dec 18 19:47:17 2020 +0100 mac80211: fix fast-rx encryption check [ Upstream commit 622d3b4e39381262da7b18ca1ed1311df227de86 ] When using WEP, the default unicast key needs to be selected, instead of the STA PTK. Signed-off-by: Felix Fietkau Link: https://lore.kernel.org/r/20201218184718.93650-5-nbd@nbd.name Signed-off-by: Johannes Berg Signed-off-by: Sasha Levin commit 4a058d556d3f53178e338746bc90734b025e8d58 Author: Javed Hasan Date: Tue Dec 15 11:47:31 2020 -0800 scsi: libfc: Avoid invoking response handler twice if ep is already completed [ Upstream commit b2b0f16fa65e910a3ec8771206bb49ee87a54ac5 ] A race condition exists between the response handler getting called because of exchange_mgr_reset() (which clears out all the active XIDs) and the response we get via an interrupt. Sequence of events: rport ba0200: Port timeout, state PLOGI rport ba0200: Port entered PLOGI state from PLOGI state xid 1052: Exchange timer armed : 20000 msecs  xid timer armed here rport ba0200: Received LOGO request while in state PLOGI rport ba0200: Delete port rport ba0200: work event 3 rport ba0200: lld callback ev 3 bnx2fc: rport_event_hdlr: event = 3, port_id = 0xba0200 bnx2fc: ba0200 - rport not created Yet!! /* Here we reset any outstanding exchanges before freeing rport using the exch_mgr_reset() */ xid 1052: Exchange timer canceled /* Here we got two responses for one xid */ xid 1052: invoking resp(), esb 20000000 state 3 xid 1052: invoking resp(), esb 20000000 state 3 xid 1052: fc_rport_plogi_resp() : ep->resp_active 2 xid 1052: fc_rport_plogi_resp() : ep->resp_active 2 Skip the response if the exchange is already completed. Link: https://lore.kernel.org/r/20201215194731.2326-1-jhasan@marvell.com Signed-off-by: Javed Hasan Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin commit b960d9ae7f76f98537f251af0363b89d09b8fb11 Author: Thomas Gleixner Date: Wed Feb 3 13:45:39 2021 +0000 futex: Handle faults correctly for PI futexes fixup_pi_state_owner() tries to ensure that the state of the rtmutex, pi_state and the user space value related to the PI futex are consistent before returning to user space. In case that the user space value update faults and the fault cannot be resolved by faulting the page in via fault_in_user_writeable() the function returns with -EFAULT and leaves the rtmutex and pi_state owner state inconsistent. A subsequent futex_unlock_pi() operates on the inconsistent pi_state and releases the rtmutex despite not owning it which can corrupt the RB tree of the rtmutex and cause a subsequent kernel stack use after free. It was suggested to loop forever in fixup_pi_state_owner() if the fault cannot be resolved, but that results in runaway tasks which is especially undesired when the problem happens due to a programming error and not due to malice. As the user space value cannot be fixed up, the proper solution is to make the rtmutex and the pi_state consistent so both have the same owner. This leaves the user space value out of sync. Any subsequent operation on the futex will fail because the 10th rule of PI futexes (pi_state owner and user space value are consistent) has been violated. As a consequence this removes the inept attempts of 'fixing' the situation in case that the current task owns the rtmutex when returning with an unresolvable fault by unlocking the rtmutex which left pi_state::owner and rtmutex::owner out of sync in a different and only slightly less dangerous way. Fixes: 1b7558e457ed ("futexes: fix fault handling in futex_lock_pi") Reported-by: gzobqq@gmail.com Signed-off-by: Thomas Gleixner Acked-by: Peter Zijlstra (Intel) Cc: stable@vger.kernel.org Signed-off-by: Lee Jones Signed-off-by: Greg Kroah-Hartman commit 48ab8e8e40599f46a72cee84989518e00e36215c Author: Thomas Gleixner Date: Wed Feb 3 13:45:38 2021 +0000 futex: Simplify fixup_pi_state_owner() [ Upstream commit f2dac39d93987f7de1e20b3988c8685523247ae2 ] Too many gotos already and an upcoming fix would make it even more unreadable. Signed-off-by: Thomas Gleixner Acked-by: Peter Zijlstra (Intel) Cc: stable@vger.kernel.org Signed-off-by: Lee Jones Signed-off-by: Greg Kroah-Hartman commit 7d455bb66ae87ea11af3630cb546d74c35fb6b7e Author: Thomas Gleixner Date: Wed Feb 3 13:45:37 2021 +0000 futex: Use pi_state_update_owner() in put_pi_state() [ Upstream commit 6ccc84f917d33312eb2846bd7b567639f585ad6d ] No point in open coding it. This way it gains the extra sanity checks. Signed-off-by: Thomas Gleixner Acked-by: Peter Zijlstra (Intel) Cc: stable@vger.kernel.org Signed-off-by: Lee Jones Signed-off-by: Greg Kroah-Hartman commit 285b624ec7818a43b96568a45ed7844a78eccd97 Author: Thomas Gleixner Date: Wed Feb 3 13:45:36 2021 +0000 rtmutex: Remove unused argument from rt_mutex_proxy_unlock() [ Upstream commit 2156ac1934166d6deb6cd0f6ffc4c1076ec63697 ] Nothing uses the argument. Remove it as preparation to use pi_state_update_owner(). Signed-off-by: Thomas Gleixner Acked-by: Peter Zijlstra (Intel) Cc: stable@vger.kernel.org Signed-off-by: Lee Jones Signed-off-by: Greg Kroah-Hartman commit 76bc0eca09e1f44f3c40cc4f69dbfe446458aaa1 Author: Thomas Gleixner Date: Wed Feb 3 13:45:35 2021 +0000 futex: Provide and use pi_state_update_owner() [ Upstream commit c5cade200ab9a2a3be9e7f32a752c8d86b502ec7 ] Updating pi_state::owner is done at several places with the same code. Provide a function for it and use that at the obvious places. This is also a preparation for a bug fix to avoid yet another copy of the same code or alternatively introducing a completely unpenetratable mess of gotos. Originally-by: Peter Zijlstra Signed-off-by: Thomas Gleixner Acked-by: Peter Zijlstra (Intel) Cc: stable@vger.kernel.org Signed-off-by: Lee Jones Signed-off-by: Greg Kroah-Hartman commit 083895e36422882ac5bb393337b6f7cb1a5f046d Author: Thomas Gleixner Date: Wed Feb 3 13:45:34 2021 +0000 futex: Replace pointless printk in fixup_owner() [ Upstream commit 04b79c55201f02ffd675e1231d731365e335c307 ] If that unexpected case of inconsistent arguments ever happens then the futex state is left completely inconsistent and the printk is not really helpful. Replace it with a warning and make the state consistent. Signed-off-by: Thomas Gleixner Acked-by: Peter Zijlstra (Intel) Cc: stable@vger.kernel.org Signed-off-by: Lee Jones Signed-off-by: Greg Kroah-Hartman commit 781691c797deefe41090e9f0c02e8fcb9fca4ccf Author: Peter Zijlstra Date: Wed Feb 3 13:45:33 2021 +0000 futex: Avoid violating the 10th rule of futex commit c1e2f0eaf015fb7076d51a339011f2383e6dd389 upstream. Julia reported futex state corruption in the following scenario: waiter waker stealer (prio > waiter) futex(WAIT_REQUEUE_PI, uaddr, uaddr2, timeout=[N ms]) futex_wait_requeue_pi() futex_wait_queue_me() freezable_schedule() futex(LOCK_PI, uaddr2) futex(CMP_REQUEUE_PI, uaddr, uaddr2, 1, 0) /* requeues waiter to uaddr2 */ futex(UNLOCK_PI, uaddr2) wake_futex_pi() cmp_futex_value_locked(uaddr2, waiter) wake_up_q() task> futex(LOCK_PI, uaddr2) __rt_mutex_start_proxy_lock() try_to_take_rt_mutex() /* steals lock */ rt_mutex_set_owner(lock, stealer) rt_mutex_wait_proxy_lock() __rt_mutex_slowlock() try_to_take_rt_mutex() /* fails, lock held by stealer */ if (timeout && !timeout->task) return -ETIMEDOUT; fixup_owner() /* lock wasn't acquired, so, fixup_pi_state_owner skipped */ return -ETIMEDOUT; /* At this point, we've returned -ETIMEDOUT to userspace, but the * futex word shows waiter to be the owner, and the pi_mutex has * stealer as the owner */ futex_lock(LOCK_PI, uaddr2) -> bails with EDEADLK, futex word says we're owner. And suggested that what commit: 73d786bd043e ("futex: Rework inconsistent rt_mutex/futex_q state") removes from fixup_owner() looks to be just what is needed. And indeed it is -- I completely missed that requeue_pi could also result in this case. So we need to restore that, except that subsequent patches, like commit: 16ffa12d7425 ("futex: Pull rt_mutex_futex_unlock() out from under hb->lock") changed all the locking rules. Even without that, the sequence: - if (rt_mutex_futex_trylock(&q->pi_state->pi_mutex)) { - locked = 1; - goto out; - } - raw_spin_lock_irq(&q->pi_state->pi_mutex.wait_lock); - owner = rt_mutex_owner(&q->pi_state->pi_mutex); - if (!owner) - owner = rt_mutex_next_owner(&q->pi_state->pi_mutex); - raw_spin_unlock_irq(&q->pi_state->pi_mutex.wait_lock); - ret = fixup_pi_state_owner(uaddr, q, owner); already suggests there were races; otherwise we'd never have to look at next_owner. So instead of doing 3 consecutive wait_lock sections with who knows what races, we do it all in a single section. Additionally, the usage of pi_state->owner in fixup_owner() was only safe because only the rt_mutex owner would modify it, which this additional case wrecks. Luckily the values can only change away and not to the value we're testing, this means we can do a speculative test and double check once we have the wait_lock. Fixes: 73d786bd043e ("futex: Rework inconsistent rt_mutex/futex_q state") Reported-by: Julia Cartwright Reported-by: Gratian Crisan Signed-off-by: Peter Zijlstra (Intel) Signed-off-by: Thomas Gleixner Tested-by: Julia Cartwright Tested-by: Gratian Crisan Cc: Darren Hart Link: https://lkml.kernel.org/r/20171208124939.7livp7no2ov65rrc@hirez.programming.kicks-ass.net Signed-off-by: Greg Kroah-Hartman [Lee: Back-ported to solve a dependency] Signed-off-by: Lee Jones Signed-off-by: Greg Kroah-Hartman commit 71f093c5e90df65b843cafa6372dca745bce2f53 Author: Peter Zijlstra Date: Wed Feb 3 13:45:32 2021 +0000 futex: Rework inconsistent rt_mutex/futex_q state [Upstream commit 73d786bd043ebc855f349c81ea805f6b11cbf2aa ] There is a weird state in the futex_unlock_pi() path when it interleaves with a concurrent futex_lock_pi() at the point where it drops hb->lock. In this case, it can happen that the rt_mutex wait_list and the futex_q disagree on pending waiters, in particular rt_mutex will find no pending waiters where futex_q thinks there are. In this case the rt_mutex unlock code cannot assign an owner. The futex side fixup code has to cleanup the inconsistencies with quite a bunch of interesting corner cases. Simplify all this by changing wake_futex_pi() to return -EAGAIN when this situation occurs. This then gives the futex_lock_pi() code the opportunity to continue and the retried futex_unlock_pi() will now observe a coherent state. The only problem is that this breaks RT timeliness guarantees. That is, consider the following scenario: T1 and T2 are both pinned to CPU0. prio(T2) > prio(T1) CPU0 T1 lock_pi() queue_me() <- Waiter is visible preemption T2 unlock_pi() loops with -EAGAIN forever Which is undesirable for PI primitives. Future patches will rectify this. Signed-off-by: Peter Zijlstra (Intel) Cc: juri.lelli@arm.com Cc: bigeasy@linutronix.de Cc: xlpang@redhat.com Cc: rostedt@goodmis.org Cc: mathieu.desnoyers@efficios.com Cc: jdesfossez@efficios.com Cc: dvhart@infradead.org Cc: bristot@redhat.com Link: http://lkml.kernel.org/r/20170322104151.850383690@infradead.org Signed-off-by: Thomas Gleixner [Lee: Back-ported to solve a dependency] Signed-off-by: Lee Jones Signed-off-by: Greg Kroah-Hartman commit d4dd7588558a0227b63193a57652e2bb8280f52c Author: Peter Zijlstra Date: Wed Feb 3 13:45:31 2021 +0000 futex: Remove rt_mutex_deadlock_account_*() These are unused and clutter up the code. Signed-off-by: Peter Zijlstra (Intel) Cc: juri.lelli@arm.com Cc: bigeasy@linutronix.de Cc: xlpang@redhat.com Cc: rostedt@goodmis.org Cc: mathieu.desnoyers@efficios.com Cc: jdesfossez@efficios.com Cc: dvhart@infradead.org Cc: bristot@redhat.com Link: http://lkml.kernel.org/r/20170322104151.652692478@infradead.org Signed-off-by: Thomas Gleixner [Lee: Back-ported to solve a dependency] Signed-off-by: Lee Jones Signed-off-by: Greg Kroah-Hartman commit 2c60d4aa8855bd699ad4d3c8ddd47e09c06868d7 Author: Peter Zijlstra Date: Wed Feb 3 13:45:30 2021 +0000 futex,rt_mutex: Provide futex specific rt_mutex API [ Upstream commit 5293c2efda37775346885c7e924d4ef7018ea60b ] Part of what makes futex_unlock_pi() intricate is that rt_mutex_futex_unlock() -> rt_mutex_slowunlock() can drop rt_mutex::wait_lock. This means it cannot rely on the atomicy of wait_lock, which would be preferred in order to not rely on hb->lock so much. The reason rt_mutex_slowunlock() needs to drop wait_lock is because it can race with the rt_mutex fastpath, however futexes have their own fast path. Since futexes already have a bunch of separate rt_mutex accessors, complete that set and implement a rt_mutex variant without fastpath for them. Signed-off-by: Peter Zijlstra (Intel) Cc: juri.lelli@arm.com Cc: bigeasy@linutronix.de Cc: xlpang@redhat.com Cc: rostedt@goodmis.org Cc: mathieu.desnoyers@efficios.com Cc: jdesfossez@efficios.com Cc: dvhart@infradead.org Cc: bristot@redhat.com Link: http://lkml.kernel.org/r/20170322104151.702962446@infradead.org Signed-off-by: Thomas Gleixner [Lee: Back-ported to solve a dependency] Signed-off-by: Lee Jones Signed-off-by: Greg Kroah-Hartman commit 17af6146dd9c9f5e354029f44030df47fecdda02 Author: Eric Dumazet Date: Thu Jan 14 08:06:37 2021 -0800 net_sched: reject silly cell_log in qdisc_get_rtab() commit e4bedf48aaa5552bc1f49703abd17606e7e6e82a upstream iproute2 probably never goes beyond 8 for the cell exponent, but stick to the max shift exponent for signed 32bit. UBSAN reported: UBSAN: shift-out-of-bounds in net/sched/sch_api.c:389:22 shift exponent 130 is too large for 32-bit type 'int' CPU: 1 PID: 8450 Comm: syz-executor586 Not tainted 5.11.0-rc3-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:79 [inline] dump_stack+0x183/0x22e lib/dump_stack.c:120 ubsan_epilogue lib/ubsan.c:148 [inline] __ubsan_handle_shift_out_of_bounds+0x432/0x4d0 lib/ubsan.c:395 __detect_linklayer+0x2a9/0x330 net/sched/sch_api.c:389 qdisc_get_rtab+0x2b5/0x410 net/sched/sch_api.c:435 cbq_init+0x28f/0x12c0 net/sched/sch_cbq.c:1180 qdisc_create+0x801/0x1470 net/sched/sch_api.c:1246 tc_modify_qdisc+0x9e3/0x1fc0 net/sched/sch_api.c:1662 rtnetlink_rcv_msg+0xb1d/0xe60 net/core/rtnetlink.c:5564 netlink_rcv_skb+0x1f0/0x460 net/netlink/af_netlink.c:2494 netlink_unicast_kernel net/netlink/af_netlink.c:1304 [inline] netlink_unicast+0x7de/0x9b0 net/netlink/af_netlink.c:1330 netlink_sendmsg+0xaa6/0xe90 net/netlink/af_netlink.c:1919 sock_sendmsg_nosec net/socket.c:652 [inline] sock_sendmsg net/socket.c:672 [inline] ____sys_sendmsg+0x5a2/0x900 net/socket.c:2345 ___sys_sendmsg net/socket.c:2399 [inline] __sys_sendmsg+0x319/0x400 net/socket.c:2432 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Eric Dumazet Reported-by: syzbot Acked-by: Cong Wang Link: https://lore.kernel.org/r/20210114160637.1660597-1-eric.dumazet@gmail.com Signed-off-by: Jakub Kicinski [sudip: adjust context] Signed-off-by: Sudip Mukherjee Signed-off-by: Greg Kroah-Hartman commit 9d54b998870b9d6b856065b7dabed3f84286ec72 Author: Lijun Pan Date: Wed Jan 27 19:34:42 2021 -0600 ibmvnic: Ensure that CRQ entry read are correctly ordered commit e41aec79e62fa50f940cf222d1e9577f14e149dc upstream. Ensure that received Command-Response Queue (CRQ) entries are properly read in order by the driver. dma_rmb barrier has been added before accessing the CRQ descriptor to ensure the entire descriptor is read before processing. Fixes: 032c5e82847a ("Driver for IBM System i/p VNIC protocol") Signed-off-by: Lijun Pan Link: https://lore.kernel.org/r/20210128013442.88319-1-ljp@linux.ibm.com Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman commit 78dcc1b1712a81a689597b6f9e4602078f0790fb Author: Pan Bian Date: Thu Jan 21 04:33:43 2021 -0800 net: dsa: bcm_sf2: put device node before return commit cf3c46631e1637582f517a574c77cd6c05793817 upstream. Put the device node dn before return error code on failure path. Fixes: 461cd1b03e32 ("net: dsa: bcm_sf2: Register our slave MDIO bus") Signed-off-by: Pan Bian Link: https://lore.kernel.org/r/20210121123343.26330-1-bianpan2016@163.com Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman