commit fb063a6465f9d17a1bd46a678bc1ffaa84e2f486 Author: Greg Kroah-Hartman Date: Tue Feb 8 18:30:41 2022 +0100 Linux 5.10.99 Link: https://lore.kernel.org/r/20220207103757.232676988@linuxfoundation.org Tested-by: Pavel Machek (CIP) Tested-by: Shuah Khan Tested-by: Guenter Roeck Tested-by: Florian Fainelli Tested-by: Slade Watkins Tested-by: Salvatore Bonaccorso Tested-by: Linux Kernel Functional Testing Tested-by: Jon Hunter Tested-by: Sudip Mukherjee Signed-off-by: Greg Kroah-Hartman commit 4889d6ee9e483c7221bc94692541632f15ffbd50 Author: Florian Westphal Date: Wed Jan 26 12:54:54 2022 +0100 selftests: nft_concat_range: add test for reload with no element add/del commit eda0cf1202acf1ef47f93d8f92d4839213431424 upstream. Add a specific test for the reload issue fixed with commit 23c54263efd7cb ("netfilter: nft_set_pipapo: allocate pcpu scratch maps on clone"). Add to set, then flush set content + restore without other add/remove in the transaction. On kernels before the fix, this test case fails: net,mac with reload [FAIL] Signed-off-by: Florian Westphal Reviewed-by: Stefano Brivio Signed-off-by: Pablo Neira Ayuso Signed-off-by: Greg Kroah-Hartman commit 557727313534d9f92e782179372833fd3499f231 Author: Waiman Long Date: Wed Feb 2 22:31:03 2022 -0500 cgroup/cpuset: Fix "suspicious RCU usage" lockdep warning commit 2bdfd2825c9662463371e6691b1a794e97fa36b4 upstream. It was found that a "suspicious RCU usage" lockdep warning was issued with the rcu_read_lock() call in update_sibling_cpumasks(). It is because the update_cpumasks_hier() function may sleep. So we have to release the RCU lock, call update_cpumasks_hier() and reacquire it afterward. Also add a percpu_rwsem_assert_held() in update_sibling_cpumasks() instead of stating that in the comment. Fixes: 4716909cc5c5 ("cpuset: Track cpusets that use parent's effective_cpus") Signed-off-by: Waiman Long Tested-by: Phil Auld Reviewed-by: Phil Auld Signed-off-by: Tejun Heo Signed-off-by: Greg Kroah-Hartman commit f1f7d1a22fd73034af73d51086b2fe2981d02028 Author: Arınç ÜNAL Date: Sat Jan 29 09:27:04 2022 +0300 net: dsa: mt7530: make NET_DSA_MT7530 select MEDIATEK_GE_PHY commit 4223f86512877b04c932e7203648b37eec931731 upstream. Make MediaTek MT753x DSA driver enable MediaTek Gigabit PHYs driver to properly control MT7530 and MT7531 switch PHYs. A noticeable change is that the behaviour of switchport interfaces going up-down-up-down is no longer there. Fixes: b8f126a8d543 ("net-next: dsa: add dsa support for Mediatek MT7530 switch") Signed-off-by: Arınç ÜNAL Reviewed-by: Andrew Lunn Reviewed-by: Florian Fainelli Link: https://lore.kernel.org/r/20220129062703.595-1-arinc.unal@arinc9.com Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman commit 84b76a509cc3ee713d79da28a5cdfb3841effe45 Author: Xin Yin Date: Wed Jan 26 14:31:46 2022 +0800 ext4: fix incorrect type issue during replay_del_range commit 8fca8a2b0a822f7936130af7299d2fd7f0a66714 upstream. should not use fast commit log data directly, add le32_to_cpu(). Reported-by: kernel test robot Fixes: 0b5b5a62b945 ("ext4: use ext4_ext_remove_space() for fast commit replay delete range") Cc: stable@kernel.org Signed-off-by: Xin Yin Reviewed-by: Ritesh Harjani Link: https://lore.kernel.org/r/20220126063146.2302-1-yinxin.x@bytedance.com Signed-off-by: Theodore Ts'o Signed-off-by: Greg Kroah-Hartman commit 62e46e0ffc02daa8fcfc02f7a932cc8a19601b19 Author: Ritesh Harjani Date: Mon Jan 17 17:41:49 2022 +0530 ext4: fix error handling in ext4_fc_record_modified_inode() commit cdce59a1549190b66f8e3fe465c2b2f714b98a94 upstream. Current code does not fully takes care of krealloc() error case, which could lead to silent memory corruption or a kernel bug. This patch fixes that. Also it cleans up some duplicated error handling logic from various functions in fast_commit.c file. Reported-by: luo penghao Suggested-by: Lukas Czerner Signed-off-by: Ritesh Harjani Reviewed-by: Jan Kara Link: https://lore.kernel.org/r/62e8b6a1cce9359682051deb736a3c0953c9d1e9.1642416995.git.riteshh@linux.ibm.com Signed-off-by: Theodore Ts'o Cc: stable@kernel.org Signed-off-by: Greg Kroah-Hartman commit 764793b4a5d0b4040c5ceeeeb859c42933f8532b Author: Ritesh Harjani Date: Mon Jan 17 17:41:47 2022 +0530 ext4: fix error handling in ext4_restore_inline_data() commit 897026aaa73eb2517dfea8d147f20ddb0b813044 upstream. While running "./check -I 200 generic/475" it sometimes gives below kernel BUG(). Ideally we should not call ext4_write_inline_data() if ext4_create_inline_data() has failed. [73131.453234] kernel BUG at fs/ext4/inline.c:223! 212 static void ext4_write_inline_data(struct inode *inode, struct ext4_iloc *iloc, 213 void *buffer, loff_t pos, unsigned int len) 214 { <...> 223 BUG_ON(!EXT4_I(inode)->i_inline_off); 224 BUG_ON(pos + len > EXT4_I(inode)->i_inline_size); This patch handles the error and prints out a emergency msg saying potential data loss for the given inode (since we couldn't restore the original inline_data due to some previous error). [ 9571.070313] EXT4-fs (dm-0): error restoring inline_data for inode -- potential data loss! (inode 1703982, error -30) Reported-by: Eric Whitney Signed-off-by: Ritesh Harjani Reviewed-by: Jan Kara Link: https://lore.kernel.org/r/9f4cd7dfd54fa58ff27270881823d94ddf78dd07.1642416995.git.riteshh@linux.ibm.com Signed-off-by: Theodore Ts'o Cc: stable@kernel.org Signed-off-by: Greg Kroah-Hartman commit 6c5bd55e36d3bdcbd723902b29bcf083e5592c6f Author: Xin Yin Date: Mon Jan 10 11:51:41 2022 +0800 ext4: modify the logic of ext4_mb_new_blocks_simple commit 31a074a0c62dc0d2bfb9b543142db4fe27f9e5eb upstream. For now in ext4_mb_new_blocks_simple, if we found a block which should be excluded then will switch to next group, this may probably cause 'group' run out of range. Change to check next block in the same group when get a block should be excluded. Also change the search range to EXT4_CLUSTERS_PER_GROUP and add error checking. Signed-off-by: Xin Yin Reviewed-by: Harshad Shirwadkar Link: https://lore.kernel.org/r/20220110035141.1980-3-yinxin.x@bytedance.com Signed-off-by: Theodore Ts'o Cc: stable@kernel.org Signed-off-by: Greg Kroah-Hartman commit 8d71fc23fcb895739803bbddd16542ff566788b3 Author: Xin Yin Date: Mon Jan 10 11:51:40 2022 +0800 ext4: prevent used blocks from being allocated during fast commit replay commit 599ea31d13617c5484c40cdf50d88301dc351cfc upstream. During fast commit replay procedure, we clear inode blocks bitmap in ext4_ext_clear_bb(), this may cause ext4_mb_new_blocks_simple() allocate blocks still in use. Make ext4_fc_record_regions() also record physical disk regions used by inodes during replay procedure. Then ext4_mb_new_blocks_simple() can excludes these blocks in use. Signed-off-by: Xin Yin Link: https://lore.kernel.org/r/20220110035141.1980-2-yinxin.x@bytedance.com Signed-off-by: Theodore Ts'o Cc: stable@kernel.org Signed-off-by: Greg Kroah-Hartman commit ef2053afd71e5b1f3a94e81293f8f67bb3c7807b Author: Sergey Shtylyov Date: Mon Jan 24 21:55:03 2022 +0300 EDAC/xgene: Fix deferred probing commit dfd0dfb9a7cc04acf93435b440dd34c2ca7b4424 upstream. The driver overrides error codes returned by platform_get_irq_optional() to -EINVAL for some strange reason, so if it returns -EPROBE_DEFER, the driver will fail the probe permanently instead of the deferred probing. Switch to propagating the proper error codes to platform driver code upwards. [ bp: Massage commit message. ] Fixes: 0d4429301c4a ("EDAC: Add APM X-Gene SoC EDAC driver") Signed-off-by: Sergey Shtylyov Signed-off-by: Borislav Petkov Cc: Link: https://lore.kernel.org/r/20220124185503.6720-3-s.shtylyov@omp.ru Signed-off-by: Greg Kroah-Hartman commit 2a12faf55baed67c343e8bc5f1e54d2a5b4336a4 Author: Sergey Shtylyov Date: Mon Jan 24 21:55:02 2022 +0300 EDAC/altera: Fix deferred probing commit 279eb8575fdaa92c314a54c0d583c65e26229107 upstream. The driver overrides the error codes returned by platform_get_irq() to -ENODEV for some strange reason, so if it returns -EPROBE_DEFER, the driver will fail the probe permanently instead of the deferred probing. Switch to propagating the proper error codes to platform driver code upwards. [ bp: Massage commit message. ] Fixes: 71bcada88b0f ("edac: altera: Add Altera SDRAM EDAC support") Signed-off-by: Sergey Shtylyov Signed-off-by: Borislav Petkov Acked-by: Dinh Nguyen Cc: Link: https://lore.kernel.org/r/20220124185503.6720-2-s.shtylyov@omp.ru Signed-off-by: Greg Kroah-Hartman commit dd274cf85269a24a60282ae21268cf3bf83514e3 Author: Peter Zijlstra Date: Thu Jan 27 12:32:51 2022 +0100 x86/perf: Default set FREEZE_ON_SMI for all commit a01994f5e5c79d3a35e5e8cf4252c7f2147323c3 upstream. Kyle reported that rr[0] has started to malfunction on Comet Lake and later CPUs due to EFI starting to make use of CPL3 [1] and the PMU event filtering not distinguishing between regular CPL3 and SMM CPL3. Since this is a privilege violation, default disable SMM visibility where possible. Administrators wanting to observe SMM cycles can easily change this using the sysfs attribute while regular users don't have access to this file. [0] https://rr-project.org/ [1] See the Intel white paper "Trustworthy SMM on the Intel vPro Platform" at https://bugzilla.kernel.org/attachment.cgi?id=300300, particularly the end of page 5. Reported-by: Kyle Huey Suggested-by: Andrew Cooper Signed-off-by: Peter Zijlstra (Intel) Cc: stable@kernel.org Link: https://lkml.kernel.org/r/YfKChjX61OW4CkYm@hirez.programming.kicks-ass.net Signed-off-by: Greg Kroah-Hartman commit 456f041e035913fcedb275aff6f8a71dfebcd394 Author: Tristan Hume Date: Thu Jan 27 17:08:06 2022 -0500 perf/x86/intel/pt: Fix crash with stop filters in single-range mode commit 1d9093457b243061a9bba23543c38726e864a643 upstream. Add a check for !buf->single before calling pt_buffer_region_size in a place where a missing check can cause a kernel crash. Fixes a bug introduced by commit 670638477aed ("perf/x86/intel/pt: Opportunistically use single range output mode"), which added a support for PT single-range output mode. Since that commit if a PT stop filter range is hit while tracing, the kernel will crash because of a null pointer dereference in pt_handle_status due to calling pt_buffer_region_size without a ToPA configured. The commit which introduced single-range mode guarded almost all uses of the ToPA buffer variables with checks of the buf->single variable, but missed the case where tracing was stopped by the PT hardware, which happens when execution hits a configured stop filter. Tested that hitting a stop filter while PT recording successfully records a trace with this patch but crashes without this patch. Fixes: 670638477aed ("perf/x86/intel/pt: Opportunistically use single range output mode") Signed-off-by: Tristan Hume Signed-off-by: Peter Zijlstra (Intel) Reviewed-by: Adrian Hunter Cc: stable@kernel.org Link: https://lkml.kernel.org/r/20220127220806.73664-1-tristan@thume.ca Signed-off-by: Greg Kroah-Hartman commit 8c0e6a8a630e7abd4bcba1c50facce84587fadaf Author: Ian Rogers Date: Fri Feb 4 17:09:41 2022 -0800 perf stat: Fix display of grouped aliased events [ Upstream commit b2b1aa73ade982c175ac926a1fd34e76ad628b94 ] An event may have a number of uncore aliases that when added to the evlist are consecutive. If there are multiple uncore events in a group then parse_events__set_leader_for_uncore_aliase will reorder the evlist so that events on the same PMU are adjacent. The collect_all_aliases function assumes that aliases are in blocks so that only the first counter is printed and all others are marked merged. The reordering for groups breaks the assumption and so all counts are printed. This change removes the assumption from collect_all_aliases that the events are in blocks and instead processes the entire evlist. Before: ``` $ perf stat -e '{UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE,UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE},duration_time' -a -A -- sleep 1 Performance counter stats for 'system wide': CPU0 256,866 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE CPU36 494,413 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE CPU0 967 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE CPU36 1,738 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE CPU0 285,161 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE CPU36 429,920 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE CPU0 955 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE CPU36 1,443 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE CPU0 310,753 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE CPU36 416,657 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE CPU0 1,231 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE CPU36 1,573 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE CPU0 416,067 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE CPU36 405,966 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE CPU0 1,481 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE CPU36 1,447 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE CPU0 312,911 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE CPU36 408,154 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE CPU0 1,086 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE CPU36 1,380 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE CPU0 333,994 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE CPU36 370,349 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE CPU0 1,287 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE CPU36 1,335 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE CPU0 188,107 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE CPU36 302,423 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE CPU0 701 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE CPU36 1,070 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE CPU0 307,221 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE CPU36 383,642 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE CPU0 1,036 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE CPU36 1,158 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE CPU0 318,479 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE CPU36 821,545 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE CPU0 1,028 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE CPU36 2,550 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE CPU0 227,618 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE CPU36 372,272 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE CPU0 903 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE CPU36 1,456 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE CPU0 376,783 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE CPU36 419,827 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE CPU0 1,406 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE CPU36 1,453 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE CPU0 286,583 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE CPU36 429,956 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE CPU0 999 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE CPU36 1,436 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE CPU0 313,867 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE CPU36 370,159 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE CPU0 1,114 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE CPU36 1,291 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE CPU0 342,083 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE CPU36 409,111 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE CPU0 1,399 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE CPU36 1,684 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE CPU0 365,828 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE CPU36 376,037 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE CPU0 1,378 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE CPU36 1,411 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE CPU0 382,456 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE CPU36 621,743 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE CPU0 1,232 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE CPU36 1,955 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE CPU0 342,316 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE CPU36 385,067 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE CPU0 1,176 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE CPU36 1,268 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE CPU0 373,588 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE CPU36 386,163 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE CPU0 1,394 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE CPU36 1,464 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE CPU0 381,206 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE CPU36 546,891 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE CPU0 1,266 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE CPU36 1,712 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE CPU0 221,176 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE CPU36 392,069 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE CPU0 831 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE CPU36 1,456 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE CPU0 355,401 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE CPU36 705,595 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE CPU0 1,235 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE CPU36 2,216 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE CPU0 371,436 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE CPU36 428,103 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE CPU0 1,306 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE CPU36 1,442 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE CPU0 384,352 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE CPU36 504,200 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE CPU0 1,468 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE CPU36 1,860 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE CPU0 228,856 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE CPU36 287,976 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE CPU0 832 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE CPU36 1,060 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE CPU0 215,121 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE CPU36 334,162 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE CPU0 681 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE CPU36 1,026 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE CPU0 296,179 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE CPU36 436,083 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE CPU0 1,084 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE CPU36 1,525 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE CPU0 262,296 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE CPU36 416,573 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE CPU0 986 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE CPU36 1,533 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE CPU0 285,852 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE CPU36 359,842 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE CPU0 1,073 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE CPU36 1,326 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE CPU0 303,379 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE CPU36 367,222 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE CPU0 1,008 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE CPU36 1,156 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE CPU0 273,487 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE CPU36 425,449 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE CPU0 932 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE CPU36 1,367 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE CPU0 297,596 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE CPU36 414,793 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE CPU0 1,140 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE CPU36 1,601 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE CPU0 342,365 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE CPU36 360,422 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE CPU0 1,291 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE CPU36 1,342 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE CPU0 327,196 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE CPU36 580,858 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE CPU0 1,122 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE CPU36 2,014 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE CPU0 296,564 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE CPU36 452,817 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE CPU0 1,087 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE CPU36 1,694 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE CPU0 375,002 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE CPU36 389,393 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE CPU0 1,478 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE CPU36 1,540 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE CPU0 365,213 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE CPU36 594,685 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE CPU0 1,401 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE CPU36 2,222 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE CPU0 1,000,749,060 ns duration_time 1.000749060 seconds time elapsed ``` After: ``` Performance counter stats for 'system wide': CPU0 20,547,434 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE CPU36 45,202,862 UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_REMOTE CPU0 82,001 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE CPU36 159,688 UNC_CHA_TOR_INSERTS.IA_MISS_DRD_REMOTE CPU0 1,000,464,828 ns duration_time 1.000464828 seconds time elapsed ``` Fixes: 3cdc5c2cb924acb4 ("perf parse-events: Handle uncore event aliases in small groups properly") Reviewed-by: Andi Kleen Signed-off-by: Ian Rogers Cc: Alexander Shishkin Cc: Alexandre Torgue Cc: Asaf Yaffe Cc: Caleb Biggers Cc: Ingo Molnar Cc: James Clark Cc: Jiri Olsa Cc: John Garry Cc: Kan Liang Cc: Kshipra Bopardikar Cc: Mark Rutland Cc: Maxime Coquelin Cc: Namhyung Kim Cc: Perry Taylor Cc: Peter Zijlstra Cc: Stephane Eranian Cc: Vineet Singh Cc: Zhengjun Xing Link: https://lore.kernel.org/r/20220205010941.1065469-1-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo Signed-off-by: Sasha Levin commit 57e8859acc6024ca9041f7fa58a0afed2ed6ea87 Author: Helge Deller Date: Wed Feb 2 14:55:31 2022 +0100 fbcon: Add option to enable legacy hardware acceleration commit a3f781a9d6114c1d1e01defb7aa234dec45d2a5f upstream. Add a config option CONFIG_FRAMEBUFFER_CONSOLE_LEGACY_ACCELERATION to enable bitblt and fillrect hardware acceleration in the framebuffer console. If disabled, such acceleration will not be used, even if it is supported by the graphics hardware driver. If you plan to use DRM as your main graphics output system, you should disable this option since it will prevent compiling in code which isn't used later on when DRM takes over. For all other configurations, e.g. if none of your graphic cards support DRM (yet), DRM isn't available for your architecture, or you can't be sure that the graphic card in the target system will support DRM, you most likely want to enable this option. In the non-accelerated case (e.g. when DRM is used), the inlined fb_scrollmode() function is hardcoded to return SCROLL_REDRAW and as such the compiler is able to optimize much unneccesary code away. In this v3 patch version I additionally changed the GETVYRES() and GETVXRES() macros to take a pointer to the fbcon_display struct. This fixes the build when console rotation is enabled and helps the compiler again to optimize out code. Signed-off-by: Helge Deller Cc: stable@vger.kernel.org # v5.10+ Signed-off-by: Helge Deller Signed-off-by: Daniel Vetter Link: https://patchwork.freedesktop.org/patch/msgid/20220202135531.92183-4-deller@gmx.de Signed-off-by: Greg Kroah-Hartman commit 460f6b1a238d2ee1d69a4911f81ee1728242f0dd Author: Helge Deller Date: Wed Feb 2 14:55:30 2022 +0100 Revert "fbcon: Disable accelerated scrolling" commit 87ab9f6b7417349aa197a6c7098d4fdd4beebb74 upstream. This reverts commit 39aead8373b3c20bb5965c024dfb51a94e526151. Revert the first (of 2) commits which disabled scrolling acceleration in fbcon/fbdev. It introduced a regression for fbdev-supported graphic cards because of the performance penalty by doing screen scrolling by software instead of using the existing graphic card 2D hardware acceleration. Console scrolling acceleration was disabled by dropping code which checked at runtime the driver hardware capabilities for the BINFO_HWACCEL_COPYAREA or FBINFO_HWACCEL_FILLRECT flags and if set, it enabled scrollmode SCROLL_MOVE which uses hardware acceleration to move screen contents. After dropping those checks scrollmode was hard-wired to SCROLL_REDRAW instead, which forces all graphic cards to redraw every character at the new screen position when scrolling. This change effectively disabled all hardware-based scrolling acceleration for ALL drivers, because now all kind of 2D hardware acceleration (bitblt, fillrect) in the drivers isn't used any longer. The original commit message mentions that only 3 DRM drivers (nouveau, omapdrm and gma500) used hardware acceleration in the past and thus code for checking and using scrolling acceleration is obsolete. This statement is NOT TRUE, because beside the DRM drivers there are around 35 other fbdev drivers which depend on fbdev/fbcon and still provide hardware acceleration for fbdev/fbcon. The original commit message also states that syzbot found lots of bugs in fbcon and thus it's "often the solution to just delete code and remove features". This is true, and the bugs - which actually affected all users of fbcon, including DRM - were fixed, or code was dropped like e.g. the support for software scrollback in vgacon (commit 973c096f6a85). So to further analyze which bugs were found by syzbot, I've looked through all patches in drivers/video which were tagged with syzbot or syzkaller back to year 2005. The vast majority fixed the reported issues on a higher level, e.g. when screen is to be resized, or when font size is to be changed. The few ones which touched driver code fixed a real driver bug, e.g. by adding a check. But NONE of those patches touched code of either the SCROLL_MOVE or the SCROLL_REDRAW case. That means, there was no real reason why SCROLL_MOVE had to be ripped-out and just SCROLL_REDRAW had to be used instead. The only reason I can imagine so far was that SCROLL_MOVE wasn't used by DRM and as such it was assumed that it could go away. That argument completely missed the fact that SCROLL_MOVE is still heavily used by fbdev (non-DRM) drivers. Some people mention that using memcpy() instead of the hardware acceleration is pretty much the same speed. But that's not true, at least not for older graphic cards and machines where we see speed decreases by factor 10 and more and thus this change leads to console responsiveness way worse than before. That's why the original commit is to be reverted. By reverting we reintroduce hardware-based scrolling acceleration and fix the performance regression for fbdev drivers. There isn't any impact on DRM when reverting those patches. Signed-off-by: Helge Deller Acked-by: Geert Uytterhoeven Acked-by: Sven Schnelle Cc: stable@vger.kernel.org # v5.10+ Signed-off-by: Helge Deller Signed-off-by: Daniel Vetter Link: https://patchwork.freedesktop.org/patch/msgid/20220202135531.92183-3-deller@gmx.de Signed-off-by: Greg Kroah-Hartman commit 460aa9d8734084628abae7b11b03d8daeff0955d Author: Riwen Lu Date: Thu Jan 6 16:46:09 2022 +0800 rtc: cmos: Evaluate century appropriate commit ff164ae39b82ee483b24579c8e22a13a8ce5bd04 upstream. There's limiting the year to 2069. When setting the rtc year to 2070, reading it returns 1970. Evaluate century starting from 19 to count the correct year. $ sudo date -s 20700106 Mon 06 Jan 2070 12:00:00 AM CST $ sudo hwclock -w $ sudo hwclock -r 1970-01-06 12:00:49.604968+08:00 Fixes: 2a4daadd4d3e5071 ("rtc: cmos: ignore bogus century byte") Signed-off-by: Riwen Lu Acked-by: Eric Wong Reviewed-by: Mateusz Jończyk Signed-off-by: Alexandre Belloni Link: https://lore.kernel.org/r/20220106084609.1223688-1-luriwen@kylinos.cn Signed-off-by: Mateusz Jończyk # preparation for stable Signed-off-by: Greg Kroah-Hartman commit 2324f5fcdf9dd104b996d12cd0c173ddcc3c950f Author: Nathan Chancellor Date: Tue Feb 1 14:25:04 2022 -0700 tools/resolve_btfids: Do not print any commands when building silently commit 7f3bdbc3f13146eb9d07de81ea71f551587a384b upstream. When building with 'make -s', there is some output from resolve_btfids: $ make -sj"$(nproc)" oldconfig prepare MKDIR .../tools/bpf/resolve_btfids/libbpf/ MKDIR .../tools/bpf/resolve_btfids//libsubcmd LINK resolve_btfids Silent mode means that no information should be emitted about what is currently being done. Use the $(silent) variable from Makefile.include to avoid defining the msg macro so that there is no information printed. Fixes: fbbb68de80a4 ("bpf: Add resolve_btfids tool to resolve BTF IDs in ELF object") Signed-off-by: Nathan Chancellor Signed-off-by: Daniel Borkmann Link: https://lore.kernel.org/bpf/20220201212503.731732-1-nathan@kernel.org Signed-off-by: Greg Kroah-Hartman commit 1536fafa23ac072ab1a8293ed8efca808b20cfa7 Author: Muhammad Usama Anjum Date: Thu Jan 27 22:44:46 2022 +0500 selftests: futex: Use variable MAKE instead of make commit b9199181a9ef8252e47e207be8c23e1f50662620 upstream. Recursive make commands should always use the variable MAKE, not the explicit command name ‘make’. This has benefits and removes the following warning when multiple jobs are used for the build: make[2]: warning: jobserver unavailable: using -j1. Add '+' to parent make rule. Fixes: a8ba798bc8ec ("selftests: enable O and KBUILD_OUTPUT") Signed-off-by: Muhammad Usama Anjum Reviewed-by: André Almeida Signed-off-by: Shuah Khan Signed-off-by: Greg Kroah-Hartman commit 8f0fff8b5968a840379f66ef9453ae87636b41fe Author: Muhammad Usama Anjum Date: Thu Jan 27 21:33:45 2022 +0500 selftests/exec: Remove pipe from TEST_GEN_FILES commit 908a26e139e8cf21093acc56d8e90ddad2ad1eff upstream. pipe named FIFO special file is being created in execveat.c to perform some tests. Makefile doesn't need to do anything with the pipe. When it isn't found, Makefile generates the following build error: make: *** No rule to make target '../tools/testing/selftests/exec/pipe', needed by 'all'. Stop. pipe is created and removed during test run-time. Amended change log to add pipe remove info: Shuah Khan Fixes: 61016db15b8e ("selftests/exec: Verify execve of non-regular files fail") Signed-off-by: Muhammad Usama Anjum Reviewed-by: Shuah Khan Signed-off-by: Shuah Khan Signed-off-by: Greg Kroah-Hartman commit 6304a613a97d6dcd49b93fbad31e9f39d1e138d6 Author: Hou Tao Date: Wed Feb 2 14:01:58 2022 +0800 bpf: Use VM_MAP instead of VM_ALLOC for ringbuf commit b293dcc473d22a62dc6d78de2b15e4f49515db56 upstream. After commit 2fd3fb0be1d1 ("kasan, vmalloc: unpoison VM_ALLOC pages after mapping"), non-VM_ALLOC mappings will be marked as accessible in __get_vm_area_node() when KASAN is enabled. But now the flag for ringbuf area is VM_ALLOC, so KASAN will complain out-of-bound access after vmap() returns. Because the ringbuf area is created by mapping allocated pages, so use VM_MAP instead. After the change, info in /proc/vmallocinfo also changes from [start]-[end] 24576 ringbuf_map_alloc+0x171/0x290 vmalloc user to [start]-[end] 24576 ringbuf_map_alloc+0x171/0x290 vmap user Fixes: 457f44363a88 ("bpf: Implement BPF ring buffer and verifier support for it") Reported-by: syzbot+5ad567a418794b9b5983@syzkaller.appspotmail.com Signed-off-by: Hou Tao Signed-off-by: Andrii Nakryiko Link: https://lore.kernel.org/bpf/20220202060158.6260-1-houtao1@huawei.com Signed-off-by: Greg Kroah-Hartman commit f744a064041cc1d84e1ad9d6a8e571f371850648 Author: Haiyue Wang Date: Fri Jan 28 18:47:14 2022 +0800 gve: fix the wrong AdminQ buffer queue index check commit 1f84a9450d75e08af70d9e2f2d5e1c0ac0c881d2 upstream. The 'tail' and 'head' are 'unsigned int' type free-running count, when 'head' is overflow, the 'int i (= tail) < u32 head' will be false: Only '- loop 0: idx = 63' result is shown, so it needs to use 'int' type to compare, it can handle the overflow correctly. typedef uint32_t u32; int main() { u32 tail, head; int stail, shead; int i, loop; tail = 0xffffffff; head = 0x00000000; for (i = tail, loop = 0; i < head; i++) { unsigned int idx = i & 63; printf("+ loop %d: idx = %u\n", loop++, idx); } stail = tail; shead = head; for (i = stail, loop = 0; i < shead; i++) { unsigned int idx = i & 63; printf("- loop %d: idx = %u\n", loop++, idx); } return 0; } Fixes: 5cdad90de62c ("gve: Batch AQ commands for creating and destroying queues.") Signed-off-by: Haiyue Wang Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman commit 51e88e8922734ea137dbeeeab87d27fe8dccfcc5 Author: Dai Ngo Date: Wed Jan 26 13:13:38 2022 -0800 nfsd: nfsd4_setclientid_confirm mistakenly expires confirmed client. commit ab451ea952fe9d7afefae55ddb28943a148247fe upstream. From RFC 7530 Section 16.34.5: o The server has not recorded an unconfirmed { v, x, c, *, * } and has recorded a confirmed { v, x, c, *, s }. If the principals of the record and of SETCLIENTID_CONFIRM do not match, the server returns NFS4ERR_CLID_INUSE without removing any relevant leased client state, and without changing recorded callback and callback_ident values for client { x }. The current code intends to do what the spec describes above but it forgot to set 'old' to NULL resulting to the confirmed client to be expired. Fixes: 2b63482185e6 ("nfsd: fix clid_inuse on mount with security change") Signed-off-by: Dai Ngo Signed-off-by: Chuck Lever Reviewed-by: Bruce Fields Signed-off-by: Greg Kroah-Hartman commit ec4334152dae175dbd8fd5bde1d2139bbe7b42d0 Author: John Meneghini Date: Mon Jan 24 09:51:10 2022 -0500 scsi: bnx2fc: Make bnx2fc_recv_frame() mp safe commit 936bd03405fc83ba039d42bc93ffd4b88418f1d3 upstream. Running tests with a debug kernel shows that bnx2fc_recv_frame() is modifying the per_cpu lport stats counters in a non-mpsafe way. Just boot a debug kernel and run the bnx2fc driver with the hardware enabled. [ 1391.699147] BUG: using smp_processor_id() in preemptible [00000000] code: bnx2fc_ [ 1391.699160] caller is bnx2fc_recv_frame+0xbf9/0x1760 [bnx2fc] [ 1391.699174] CPU: 2 PID: 4355 Comm: bnx2fc_l2_threa Kdump: loaded Tainted: G B [ 1391.699180] Hardware name: HP ProLiant DL120 G7, BIOS J01 07/01/2013 [ 1391.699183] Call Trace: [ 1391.699188] dump_stack_lvl+0x57/0x7d [ 1391.699198] check_preemption_disabled+0xc8/0xd0 [ 1391.699205] bnx2fc_recv_frame+0xbf9/0x1760 [bnx2fc] [ 1391.699215] ? do_raw_spin_trylock+0xb5/0x180 [ 1391.699221] ? bnx2fc_npiv_create_vports.isra.0+0x4e0/0x4e0 [bnx2fc] [ 1391.699229] ? bnx2fc_l2_rcv_thread+0xb7/0x3a0 [bnx2fc] [ 1391.699240] bnx2fc_l2_rcv_thread+0x1af/0x3a0 [bnx2fc] [ 1391.699250] ? bnx2fc_ulp_init+0xc0/0xc0 [bnx2fc] [ 1391.699258] kthread+0x364/0x420 [ 1391.699263] ? _raw_spin_unlock_irq+0x24/0x50 [ 1391.699268] ? set_kthread_struct+0x100/0x100 [ 1391.699273] ret_from_fork+0x22/0x30 Restore the old get_cpu/put_cpu code with some modifications to reduce the size of the critical section. Link: https://lore.kernel.org/r/20220124145110.442335-1-jmeneghi@redhat.com Fixes: d576a5e80cd0 ("bnx2fc: Improve stats update mechanism") Tested-by: Guangwu Zhang Acked-by: Saurav Kashyap Signed-off-by: John Meneghini Signed-off-by: Martin K. Petersen Signed-off-by: Greg Kroah-Hartman commit fd482f2d63dbc9f2fe179de2de9202021ed7e6fe Author: Florian Fainelli Date: Thu Jan 27 13:50:31 2022 -0800 pinctrl: bcm2835: Fix a few error paths commit 5297c693d8c8e08fa742e3112cf70723f7a04da2 upstream. After commit 266423e60ea1 ("pinctrl: bcm2835: Change init order for gpio hogs") a few error paths would not unwind properly the registration of gpio ranges. Correct that by assigning a single error label and goto it whenever we encounter a fatal error. Fixes: 266423e60ea1 ("pinctrl: bcm2835: Change init order for gpio hogs") Signed-off-by: Florian Fainelli Link: https://lore.kernel.org/r/20220127215033.267227-1-f.fainelli@gmail.com Signed-off-by: Linus Walleij Signed-off-by: Greg Kroah-Hartman commit 752d9eafc64e7a1f8a62f6b3fad2086ba8c73058 Author: Łukasz Bartosik Date: Mon Jan 24 13:55:29 2022 +0100 pinctrl: intel: fix unexpected interrupt commit e986f0e602f19ecb7880b04dd1db415ed9bca3f6 upstream. ASUS Chromebook C223 with Celeron N3350 crashes sometimes during cold booot. Inspection of the kernel log showed that it gets into an inifite loop logging the following message: ->handle_irq(): 000000009cdb51e8, handle_bad_irq+0x0/0x251 ->irq_data.chip(): 000000005ec212a7, 0xffffa043009d8e7 ->action(): 00000 IRQ_NOPROBE set unexpected IRQ trap at vector 7c The issue happens during cold boot but only if cold boot happens at most several dozen seconds after Chromebook is powered off. For longer intervals between power off and power on (cold boot) the issue does not reproduce. The unexpected interrupt is sourced from INT3452 GPIO pin which is used for SD card detect. Investigation relevealed that when the interval between power off and power on (cold boot) is less than several dozen seconds then values of INT3452 GPIO interrupt enable and interrupt pending registers survive power off and power on sequence and interrupt for SD card detect pin is enabled and pending during probe of SD controller which causes the unexpected IRQ message. "Intel Pentium and Celeron Processor N- and J- Series" volume 3 doc mentions that GPIO interrupt enable and status registers default value is 0x0. The fix clears INT3452 GPIO interrupt enabled and interrupt pending registers in its probe function. Fixes: 7981c0015af2 ("pinctrl: intel: Add Intel Sunrisepoint pin controller and GPIO support") Signed-off-by: Łukasz Bartosik Signed-off-by: Andy Shevchenko Signed-off-by: Greg Kroah-Hartman commit 14bc9978b486d0780f1d1d834202c899da68c47d Author: Andy Shevchenko Date: Wed Jan 19 20:19:15 2022 +0200 pinctrl: intel: Fix a glitch when updating IRQ flags on a preconfigured line commit e12963c453263d5321a2c610e98cbc731233b685 upstream. The commit af7e3eeb84e2 ("pinctrl: intel: Disable input and output buffer when switching to GPIO") hadn't taken into account an update of the IRQ flags scenario. When updating the IRQ flags on the preconfigured line the ->irq_set_type() is called again. In such case the sequential Rx buffer configuration changes may trigger a falling or rising edge interrupt that may lead, on some platforms, to an undesired event. This may happen because each of intel_gpio_set_gpio_mode() and __intel_gpio_set_direction() updates the pad configuration with a different value of the GPIORXDIS bit. Notable, that the intel_gpio_set_gpio_mode() is called only for the pads that are configured as an input. Due to this fact, integrate the logic of __intel_gpio_set_direction() call into the intel_gpio_set_gpio_mode() so that the Rx buffer won't be disabled and immediately re-enabled. Fixes: af7e3eeb84e2 ("pinctrl: intel: Disable input and output buffer when switching to GPIO") Reported-by: Kane Chen Signed-off-by: Andy Shevchenko Acked-by: Mika Westerberg Tested-by: Grace Kao Signed-off-by: Greg Kroah-Hartman commit 5a45448ac95b715173edb1cd090ff24b6586d921 Author: Dan Carpenter Date: Wed Jan 19 15:31:01 2022 +0300 ASoC: max9759: fix underflow in speaker_gain_control_put() commit 4c907bcd9dcd233da6707059d777ab389dcbd964 upstream. Check for negative values of "priv->gain" to prevent an out of bounds access. The concern is that these might come from the user via: -> snd_ctl_elem_write_user() -> snd_ctl_elem_write() -> kctl->put() Fixes: fa8d915172b8 ("ASoC: max9759: Add Amplifier Driver") Signed-off-by: Dan Carpenter Link: https://lore.kernel.org/r/20220119123101.GA9509@kili Signed-off-by: Mark Brown Signed-off-by: Greg Kroah-Hartman commit 02f4597198329076f4f02f27906447a90357ae66 Author: Jiasheng Jiang Date: Tue Jan 11 10:50:48 2022 +0800 ASoC: cpcap: Check for NULL pointer after calling of_get_child_by_name commit f7a6021aaf02088870559f82fc13c58cda7fea1a upstream. If the device does not exist, of_get_child_by_name() will return NULL pointer. And devm_snd_soc_register_component() does not check it. Also, I have noticed that cpcap_codec_driver has not been used yet. Therefore, it should be better to check it in order to avoid the future dereference of the NULL pointer. Fixes: f6cdf2d3445d ("ASoC: cpcap: new codec") Signed-off-by: Jiasheng Jiang Link: https://lore.kernel.org/r/20220111025048.524134-1-jiasheng@iscas.ac.cn Signed-off-by: Mark Brown Signed-off-by: Greg Kroah-Hartman commit cb5f1fbd1f2233fc3f7c27fbb04e3f283f46f7b9 Author: Robert Hancock Date: Fri Jan 7 15:47:06 2022 -0600 ASoC: xilinx: xlnx_formatter_pcm: Make buffer bytes multiple of period bytes commit e958b5884725dac86d36c1e7afe5a55f31feb0b2 upstream. This patch is based on one in the Xilinx kernel tree, "ASoc: xlnx: Make buffer bytes multiple of period bytes" by Devarsh Thakkar. The same issue exists in the mainline version of the driver. The original patch description is as follows: "The Xilinx Audio Formatter IP has a constraint on period bytes to be multiple of 64. This leads to driver changing the period size to suitable frames such that period bytes are multiple of 64. Now since period bytes and period size are updated but not the buffer bytes, this may make the buffer bytes unaligned and not multiple of period bytes. When this happens we hear popping noise as while DMA is being done the buffer bytes are not enough to complete DMA access for last period of frame within the application buffer boundary. To avoid this, align buffer bytes too as multiple of 64, and set another constraint to always enforce number of periods as integer. Now since, there is already a rule in alsa core to enforce Buffer size = Number of Periods * Period Size this automatically aligns buffer bytes as multiple of period bytes." Fixes: 6f6c3c36f091 ("ASoC: xlnx: add pcm formatter platform driver") Cc: Devarsh Thakkar Signed-off-by: Robert Hancock Link: https://lore.kernel.org/r/20220107214711.1100162-2-robert.hancock@calian.com Signed-off-by: Mark Brown Signed-off-by: Greg Kroah-Hartman commit 56e0747d59accbd4785680b140bdc4130bec1217 Author: Miaoqian Lin Date: Thu Jan 27 13:13:34 2022 +0000 ASoC: fsl: Add missing error handling in pcm030_fabric_probe commit fb25621da5702c104ce0a48de5b174ced09e5b4e upstream. Add the missing platform_device_put() and platform_device_del() before return from pcm030_fabric_probe in the error handling case. Fixes: c912fa913446 ("ASoC: fsl: register the wm9712-codec") Signed-off-by: Miaoqian Lin Link: https://lore.kernel.org/r/20220127131336.30214-1-linmq006@gmail.com Signed-off-by: Mark Brown Signed-off-by: Greg Kroah-Hartman commit 3e698375517d0684224b7d4fa5df682efb84613b Author: Dan Carpenter Date: Mon Jan 24 15:24:09 2022 +0300 drm/i915/overlay: Prevent divide by zero bugs in scaling commit 90a3d22ff02b196d5884e111f39271a1d4ee8e3e upstream. Smatch detected a divide by zero bug in check_overlay_scaling(). drivers/gpu/drm/i915/display/intel_overlay.c:976 check_overlay_scaling() error: potential divide by zero bug '/ rec->dst_height'. drivers/gpu/drm/i915/display/intel_overlay.c:980 check_overlay_scaling() error: potential divide by zero bug '/ rec->dst_width'. Prevent this by ensuring that the dst height and width are non-zero. Fixes: 02e792fbaadb ("drm/i915: implement drmmode overlay support v4") Signed-off-by: Dan Carpenter Signed-off-by: Ville Syrjälä Link: https://patchwork.freedesktop.org/patch/msgid/20220124122409.GA31673@kili (cherry picked from commit cf5b64f7f10b28bebb9b7c9d25e7aee5cbe43918) Signed-off-by: Tvrtko Ursulin Signed-off-by: Greg Kroah-Hartman commit 9ea01853611114567a0207b774eb76bfeed74878 Author: Yannick Vignon Date: Thu Feb 3 17:00:25 2022 +0100 net: stmmac: ensure PTP time register reads are consistent commit 80d4609008e6d696a279e39ae7458c916fcd44c1 upstream. Even if protected from preemption and interrupts, a small time window remains when the 2 register reads could return inconsistent values, each time the "seconds" register changes. This could lead to an about 1-second error in the reported time. Add logic to ensure the "seconds" and "nanoseconds" values are consistent. Fixes: 92ba6888510c ("stmmac: add the support for PTP hw clock driver") Signed-off-by: Yannick Vignon Reviewed-by: Russell King (Oracle) Link: https://lore.kernel.org/r/20220203160025.750632-1-yannick.vignon@oss.nxp.com Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman commit 41df2da2c1f396c6f049a205073845a48364e15a Author: Camel Guo Date: Mon Jan 31 09:38:40 2022 +0100 net: stmmac: dump gmac4 DMA registers correctly commit 7af037c39b600bac2c716dd1228e8ddbe149573f upstream. Unlike gmac100, gmac1000, gmac4 has 27 DMA registers and they are located at DMA_CHAN_BASE_ADDR (0x1100). In order for ethtool to dump gmac4 DMA registers correctly, this commit checks if a net_device has gmac4 and uses different logic to dump its DMA registers. This fixes the following KASAN warning, which can normally be triggered by a command similar like "ethtool -d eth0": BUG: KASAN: vmalloc-out-of-bounds in dwmac4_dump_dma_regs+0x6d4/0xb30 Write of size 4 at addr ffffffc010177100 by task ethtool/1839 kasan_report+0x200/0x21c __asan_report_store4_noabort+0x34/0x60 dwmac4_dump_dma_regs+0x6d4/0xb30 stmmac_ethtool_gregs+0x110/0x204 ethtool_get_regs+0x200/0x4b0 dev_ethtool+0x1dac/0x3800 dev_ioctl+0x7c0/0xb50 sock_ioctl+0x298/0x6c4 ... Fixes: fbf68229ffe7 ("net: stmmac: unify registers dumps methods") Signed-off-by: Camel Guo Link: https://lore.kernel.org/r/20220131083841.3346801-1-camel.guo@axis.com Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman commit 114bf9350413f00fe5ae1edb566593135c7c99c3 Author: Lior Nahmanson Date: Sun Jan 30 13:37:52 2022 +0200 net: macsec: Verify that send_sci is on when setting Tx sci explicitly commit d0cfa548dbde354de986911d3913897b5448faad upstream. When setting Tx sci explicit, the Rx side is expected to use this sci and not recalculate it from the packet.However, in case of Tx sci is explicit and send_sci is off, the receiver is wrongly recalculate the sci from the source MAC address which most likely be different than the explicit sci. Fix by preventing such configuration when macsec newlink is established and return EINVAL error code on such cases. Fixes: c09440f7dcb3 ("macsec: introduce IEEE 802.1AE driver") Signed-off-by: Lior Nahmanson Reviewed-by: Raed Salem Signed-off-by: Raed Salem Link: https://lore.kernel.org/r/1643542672-29403-1-git-send-email-raeds@nvidia.com Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman commit 2e7f5b6ee1a7a2c628253a95b0a95b582901ef1b Author: Lior Nahmanson Date: Sun Jan 30 13:29:01 2022 +0200 net: macsec: Fix offload support for NETDEV_UNREGISTER event commit 9cef24c8b76c1f6effe499d2f131807c90f7ce9a upstream. Current macsec netdev notify handler handles NETDEV_UNREGISTER event by releasing relevant SW resources only, this causes resources leak in case of macsec HW offload, as the underlay driver was not notified to clean it's macsec offload resources. Fix by calling the underlay driver to clean it's relevant resources by moving offload handling from macsec_dellink() to macsec_common_dellink() when handling NETDEV_UNREGISTER event. Fixes: 3cf3227a21d1 ("net: macsec: hardware offloading infrastructure") Signed-off-by: Lior Nahmanson Reviewed-by: Raed Salem Signed-off-by: Raed Salem Reviewed-by: Antoine Tenart Link: https://lore.kernel.org/r/1643542141-28956-1-git-send-email-raeds@nvidia.com Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman commit 87b1c9fab6fe570182abcf7908e13a86478bc996 Author: Miquel Raynal Date: Tue Jan 25 13:14:25 2022 +0100 net: ieee802154: Return meaningful error codes from the netlink helpers commit 79c37ca73a6e9a33f7b2b7783ba6af07a448c8a9 upstream. Returning -1 does not indicate anything useful. Use a standard and meaningful error code instead. Fixes: a26c5fd7622d ("nl802154: add support for security layer") Signed-off-by: Miquel Raynal Acked-by: Alexander Aring Link: https://lore.kernel.org/r/20220125121426.848337-6-miquel.raynal@bootlin.com Signed-off-by: Stefan Schmidt Signed-off-by: Greg Kroah-Hartman commit 78b3f20c17cbcb7645bfa63f2ca0e11b53c09d56 Author: Miquel Raynal Date: Tue Jan 25 13:14:24 2022 +0100 net: ieee802154: ca8210: Stop leaking skb's commit 621b24b09eb61c63f262da0c9c5f0e93348897e5 upstream. Upon error the ieee802154_xmit_complete() helper is not called. Only ieee802154_wake_queue() is called manually. We then leak the skb structure. Free the skb structure upon error before returning. Fixes: ded845a781a5 ("ieee802154: Add CA8210 IEEE 802.15.4 device driver") Signed-off-by: Miquel Raynal Acked-by: Alexander Aring Link: https://lore.kernel.org/r/20220125121426.848337-5-miquel.raynal@bootlin.com Signed-off-by: Stefan Schmidt Signed-off-by: Greg Kroah-Hartman commit 0bfe50dc5d91f6ab445088ef25f2f0fb163fb631 Author: Miquel Raynal Date: Tue Jan 25 13:14:22 2022 +0100 net: ieee802154: mcr20a: Fix lifs/sifs periods commit d753c4004820a888ec007dd88b271fa9c3172c5c upstream. These periods are expressed in time units (microseconds) while 40 and 12 are the number of symbol durations these periods will last. We need to multiply them both with phy->symbol_duration in order to get these values in microseconds. Fixes: 8c6ad9cc5157 ("ieee802154: Add NXP MCR20A IEEE 802.15.4 transceiver driver") Signed-off-by: Miquel Raynal Acked-by: Alexander Aring Link: https://lore.kernel.org/r/20220125121426.848337-3-miquel.raynal@bootlin.com Signed-off-by: Stefan Schmidt Signed-off-by: Greg Kroah-Hartman commit 75bbda318987975905ad159c0bf30a350f847f49 Author: Miquel Raynal Date: Tue Jan 25 13:14:21 2022 +0100 net: ieee802154: hwsim: Ensure proper channel selection at probe time commit 1293fccc9e892712d910ec96079d3717307f1d2d upstream. Drivers are expected to set the PHY current_channel and current_page according to their default state. The hwsim driver is advertising being configured on channel 13 by default but that is not reflected in its own internal pib structure. In order to ensure that this driver consider the current channel as being 13 internally, we at least need to set the pib->channel field to 13. Fixes: f25da51fdc38 ("ieee802154: hwsim: add replacement for fakelb") Signed-off-by: Miquel Raynal [stefan@datenfreihafen.org: fixed assigment from page to channel] Acked-by: Alexander Aring Link: https://lore.kernel.org/r/20220125121426.848337-2-miquel.raynal@bootlin.com Signed-off-by: Stefan Schmidt Signed-off-by: Greg Kroah-Hartman commit e895e067d73e154b1ebc84a124e00831e311d9b0 Author: Xin Xiong Date: Tue Jan 25 18:12:15 2022 +0800 spi: uniphier: fix reference count leak in uniphier_spi_probe() commit 37c2c83ca4f1ef4b6908181ac98e18360af89b42 upstream. The issue happens in several error paths in uniphier_spi_probe(). When either dma_get_slave_caps() or devm_spi_register_master() returns an error code, the function forgets to decrease the refcount of both `dma_rx` and `dma_tx` objects, which may lead to refcount leaks. Fix it by decrementing the reference count of specific objects in those error paths. Signed-off-by: Xin Xiong Signed-off-by: Xiyu Yang Signed-off-by: Xin Tan Reviewed-by: Kunihiko Hayashi Fixes: 28d1dddc59f6 ("spi: uniphier: Add DMA transfer mode support") Link: https://lore.kernel.org/r/20220125101214.35677-1-xiongx18@fudan.edu.cn Signed-off-by: Mark Brown Signed-off-by: Greg Kroah-Hartman commit ec942d08e0706c882ff8d7c5b724c6744cd3fea8 Author: Miaoqian Lin Date: Wed Jan 26 11:04:47 2022 +0000 spi: meson-spicc: add IRQ check in meson_spicc_probe commit e937440f7fc444a3e3f1fb75ea65292d6f433a44 upstream. This check misses checking for platform_get_irq()'s call and may passes the negative error codes to devm_request_irq(), which takes unsigned IRQ #, causing it to fail with -EINVAL, overriding an original error code. Stop calling devm_request_irq() with invalid IRQ #s. Fixes: 454fa271bc4e ("spi: Add Meson SPICC driver") Signed-off-by: Miaoqian Lin Link: https://lore.kernel.org/r/20220126110447.24549-1-linmq006@gmail.com Signed-off-by: Mark Brown Signed-off-by: Greg Kroah-Hartman commit c2cf65e1008ba50d1688b94a887dc1d10743f877 Author: Benjamin Gaignard Date: Mon Jan 31 15:17:08 2022 +0100 spi: mediatek: Avoid NULL pointer crash in interrupt commit f83a96e5f033fbbd21764705cb9c04234b96218e upstream. In some case, like after a transfer timeout, master->cur_msg pointer is NULL which led to a kernel crash when trying to use master->cur_msg->spi. mtk_spi_can_dma(), pointed by master->can_dma, doesn't use this parameter avoid the problem by setting NULL as second parameter. Fixes: a568231f46322 ("spi: mediatek: Add spi bus for Mediatek MT8173") Signed-off-by: Benjamin Gaignard Link: https://lore.kernel.org/r/20220131141708.888710-1-benjamin.gaignard@collabora.com Signed-off-by: Mark Brown Signed-off-by: Greg Kroah-Hartman commit 30e05c98b99d138306e948afd0c7eaa7ce07f6dc Author: Kamal Dasu Date: Thu Jan 27 13:53:59 2022 -0500 spi: bcm-qspi: check for valid cs before applying chip select commit 2cbd27267ffe020af1442b95ec57f59a157ba85c upstream. Apply only valid chip select value. This change fixes case where chip select is set to initial value of '-1' during probe and PM supend and subsequent resume can try to use the value with undefined behaviour. Also in case where gpio based chip select, the check in bcm_qspi_chip_select() shall prevent undefined behaviour on resume. Fixes: fa236a7ef240 ("spi: bcm-qspi: Add Broadcom MSPI driver") Signed-off-by: Kamal Dasu Acked-by: Florian Fainelli Link: https://lore.kernel.org/r/20220127185359.27322-1-kdasu.kdev@gmail.com Signed-off-by: Mark Brown Signed-off-by: Greg Kroah-Hartman commit 6d226e8afe88534e74df18e4f06fe425abb8e0dc Author: Joerg Roedel Date: Fri Feb 4 12:55:37 2022 +0100 iommu/amd: Fix loop timeout issue in iommu_ga_log_enable() commit 9b45a7738eec52bf0f5d8d3d54e822962781c5f2 upstream. The polling loop for the register change in iommu_ga_log_enable() needs to have a udelay() in it. Otherwise the CPU might be faster than the IOMMU hardware and wrongly trigger the WARN_ON() further down the code stream. Use a 10us for udelay(), has there is some hardware where activation of the GA log can take more than a 100ms. A future optimization should move the activation check of the GA log to the point where it gets used for the first time. But that is a bigger change and not suitable for a fix. Fixes: 8bda0cfbdc1a ("iommu/amd: Detect and initialize guest vAPIC log") Signed-off-by: Joerg Roedel Link: https://lore.kernel.org/r/20220204115537.3894-1-joro@8bytes.org Signed-off-by: Greg Kroah-Hartman commit 9d9995b0371e4e8c18d4f955479e5d47efe7b2d4 Author: Guoqing Jiang Date: Fri Jan 28 11:10:02 2022 +0800 iommu/vt-d: Fix potential memory leak in intel_setup_irq_remapping() commit 99e675d473eb8cf2deac1376a0f840222fc1adcf upstream. After commit e3beca48a45b ("irqdomain/treewide: Keep firmware node unconditionally allocated"). For tear down scenario, fn is only freed after fail to allocate ir_domain, though it also should be freed in case dmar_enable_qi returns error. Besides free fn, irq_domain and ir_msi_domain need to be removed as well if intel_setup_irq_remapping fails to enable queued invalidation. Improve the rewinding path by add out_free_ir_domain and out_free_fwnode lables per Baolu's suggestion. Fixes: e3beca48a45b ("irqdomain/treewide: Keep firmware node unconditionally allocated") Suggested-by: Lu Baolu Signed-off-by: Guoqing Jiang Link: https://lore.kernel.org/r/20220119063640.16864-1-guoqing.jiang@linux.dev Signed-off-by: Lu Baolu Link: https://lore.kernel.org/r/20220128031002.2219155-3-baolu.lu@linux.intel.com Signed-off-by: Joerg Roedel Signed-off-by: Greg Kroah-Hartman commit b3958d315163d1f5e0c6c2bff2c02d06f03e853b Author: Leon Romanovsky Date: Mon Jan 31 11:45:26 2022 +0200 RDMA/mlx4: Don't continue event handler after memory allocation failure commit f3136c4ce7acf64bee43135971ca52a880572e32 upstream. The failure to allocate memory during MLX4_DEV_EVENT_PORT_MGMT_CHANGE event handler will cause skip the assignment logic, but ib_dispatch_event() will be called anyway. Fix it by calling to return instead of break after memory allocation failure. Fixes: 00f5ce99dc6e ("mlx4: Use port management change event instead of smp_snoop") Link: https://lore.kernel.org/r/12a0e83f18cfad4b5f62654f141e240d04915e10.1643622264.git.leonro@nvidia.com Signed-off-by: Leon Romanovsky Reviewed-by: Håkon Bugge Signed-off-by: Jason Gunthorpe Signed-off-by: Greg Kroah-Hartman commit d3f8b927df2fcfc19f43137094d7defe704f3403 Author: Bernard Metzler Date: Sun Jan 30 18:08:15 2022 +0100 RDMA/siw: Fix broken RDMA Read Fence/Resume logic. commit b43a76f423aa304037603fd6165c4a534d2c09a7 upstream. Code unconditionally resumed fenced SQ processing after next RDMA Read completion, even if other RDMA Read responses are still outstanding, or ORQ is full. Also adds comments for better readability of fence processing, and removes orq_get_tail() helper, which is not needed anymore. Fixes: 8b6a361b8c48 ("rdma/siw: receive path") Fixes: a531975279f3 ("rdma/siw: main include file") Link: https://lore.kernel.org/r/20220130170815.1940-1-bmt@zurich.ibm.com Reported-by: Jared Holzman Signed-off-by: Bernard Metzler Signed-off-by: Jason Gunthorpe Signed-off-by: Greg Kroah-Hartman commit c7db20f5be73b6b3768d15b075a09e4b0d5c13f7 Author: Mike Marciniszyn Date: Wed Jan 19 04:28:09 2022 -0500 IB/rdmavt: Validate remote_addr during loopback atomic tests commit 4028bccb003cf67e46632dee7f97ddc5d7b6e685 upstream. The rdma-core test suite sends an unaligned remote address and expects a failure. ERROR: test_atomic_non_aligned_addr (tests.test_atomic.AtomicTest) The qib/hfi1 rc handling validates properly, but the test has the client and server on the same system. The loopback of these operations is a distinct code path. Fix by syntaxing the proposed remote address in the loopback code path. Fixes: 15703461533a ("IB/{hfi1, qib, rdmavt}: Move ruc_loopback to rdmavt") Link: https://lore.kernel.org/r/1642584489-141005-1-git-send-email-mike.marciniszyn@cornelisnetworks.com Reviewed-by: Dennis Dalessandro Signed-off-by: Mike Marciniszyn Signed-off-by: Jason Gunthorpe Signed-off-by: Greg Kroah-Hartman commit 75c610212b9f1756b9384911d3a2c347eee8031c Author: Leon Romanovsky Date: Tue Jan 18 09:35:01 2022 +0200 RDMA/ucma: Protect mc during concurrent multicast leaves commit 36e8169ec973359f671f9ec7213547059cae972e upstream. Partially revert the commit mentioned in the Fixes line to make sure that allocation and erasing multicast struct are locked. BUG: KASAN: use-after-free in ucma_cleanup_multicast drivers/infiniband/core/ucma.c:491 [inline] BUG: KASAN: use-after-free in ucma_destroy_private_ctx+0x914/0xb70 drivers/infiniband/core/ucma.c:579 Read of size 8 at addr ffff88801bb74b00 by task syz-executor.1/25529 CPU: 0 PID: 25529 Comm: syz-executor.1 Not tainted 5.16.0-rc7-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106 print_address_description.constprop.0.cold+0x8d/0x320 mm/kasan/report.c:247 __kasan_report mm/kasan/report.c:433 [inline] kasan_report.cold+0x83/0xdf mm/kasan/report.c:450 ucma_cleanup_multicast drivers/infiniband/core/ucma.c:491 [inline] ucma_destroy_private_ctx+0x914/0xb70 drivers/infiniband/core/ucma.c:579 ucma_destroy_id+0x1e6/0x280 drivers/infiniband/core/ucma.c:614 ucma_write+0x25c/0x350 drivers/infiniband/core/ucma.c:1732 vfs_write+0x28e/0xae0 fs/read_write.c:588 ksys_write+0x1ee/0x250 fs/read_write.c:643 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae Currently the xarray search can touch a concurrently freeing mc as the xa_for_each() is not surrounded by any lock. Rather than hold the lock for a full scan hold it only for the effected items, which is usually an empty list. Fixes: 95fe51096b7a ("RDMA/ucma: Remove mc_list and rely on xarray") Link: https://lore.kernel.org/r/1cda5fabb1081e8d16e39a48d3a4f8160cea88b8.1642491047.git.leonro@nvidia.com Reported-by: syzbot+e3f96c43d19782dd14a7@syzkaller.appspotmail.com Suggested-by: Jason Gunthorpe Reviewed-by: Maor Gottlieb Signed-off-by: Leon Romanovsky Signed-off-by: Jason Gunthorpe Signed-off-by: Greg Kroah-Hartman commit 371979069a577ee5bc1bcaaa39fb53d9e4dc7e3f Author: Maor Gottlieb Date: Tue Jan 18 09:35:00 2022 +0200 RDMA/cma: Use correct address when leaving multicast group commit d9e410ebbed9d091b97bdf45b8a3792e2878dc48 upstream. In RoCE we should use cma_iboe_set_mgid() and not cma_set_mgid to generate the mgid, otherwise we will generate an IGMP for an incorrect address. Fixes: b5de0c60cc30 ("RDMA/cma: Fix use after free race in roce multicast join") Link: https://lore.kernel.org/r/913bc6783fd7a95fe71ad9454e01653ee6fb4a9a.1642491047.git.leonro@nvidia.com Signed-off-by: Maor Gottlieb Signed-off-by: Leon Romanovsky Signed-off-by: Jason Gunthorpe Signed-off-by: Greg Kroah-Hartman commit aa4ecd995f591013bca21d3ce599691772c193b5 Author: Yutian Yang Date: Thu Sep 2 14:55:07 2021 -0700 memcg: charge fs_context and legacy_fs_context commit bb902cb47cf93b33cd92b3b7a4019330a03ef57f upstream. This patch adds accounting flags to fs_context and legacy_fs_context allocation sites so that kernel could correctly charge these objects. We have written a PoC to demonstrate the effect of the missing-charging bugs. The PoC takes around 1,200MB unaccounted memory, while it is charged for only 362MB memory usage. We evaluate the PoC on QEMU x86_64 v5.2.90 + Linux kernel v5.10.19 + Debian buster. All the limitations including ulimits and sysctl variables are set as default. Specifically, the hard NOFILE limit and nr_open in sysctl are both 1,048,576. /*------------------------- POC code ----------------------------*/ #define _GNU_SOURCE #include #include #include #include #include #include #include #include #include #include #include #include #define errExit(msg) do { perror(msg); exit(EXIT_FAILURE); \ } while (0) #define STACK_SIZE (8 * 1024) #ifndef __NR_fsopen #define __NR_fsopen 430 #endif static inline int fsopen(const char *fs_name, unsigned int flags) { return syscall(__NR_fsopen, fs_name, flags); } static char thread_stack[512][STACK_SIZE]; int thread_fn(void* arg) { for (int i = 0; i< 800000; ++i) { int fsfd = fsopen("nfs", FSOPEN_CLOEXEC); if (fsfd == -1) { errExit("fsopen"); } } while(1); return 0; } int main(int argc, char *argv[]) { int thread_pid; for (int i = 0; i < 1; ++i) { thread_pid = clone(thread_fn, thread_stack[i] + STACK_SIZE, \ SIGCHLD, NULL); } while(1); return 0; } /*-------------------------- end --------------------------------*/ Link: https://lkml.kernel.org/r/1626517201-24086-1-git-send-email-nglaive@gmail.com Signed-off-by: Yutian Yang Reviewed-by: Shakeel Butt Cc: Michal Hocko Cc: Johannes Weiner Cc: Vladimir Davydov Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman commit 080f371d984e8039c66db87f3c54804b0d172329 Author: Guenter Roeck Date: Fri Feb 4 17:47:55 2022 -0800 Revert "ASoC: mediatek: Check for error clk pointer" This reverts commit d491a2c2cf96f9f3d855cf0bcd807d48ccb98e81 which is commit 9de2b9286a6dd16966959b3cb34fc2ddfd39213e upstream With this patch in the tree, Chromebooks running the affected hardware no longer boot. Bisect points to this patch, and reverting it fixes the problem. An analysis of the code with this patch applied shows: ret = init_clks(pdev, clk); if (ret) return ERR_PTR(ret); ... for (j = 0; j < MAX_CLKS && data->clk_id[j]; j++) { struct clk *c = clk[data->clk_id[j]]; if (IS_ERR(c)) { dev_err(&pdev->dev, "%s: clk unavailable\n", data->name); return ERR_CAST(c); } scpd->clk[j] = c; } Not all clocks in the clk_names array have to be present. Only the clocks in the data->clk_id array are actually needed. The code already checks if the required clocks are available and bails out if not. The assumption that all clocks have to be present is wrong, and commit 9de2b9286a6d needs to be reverted. Fixes: 9de2b9286a6d ("ASoC: mediatek: Check for error clk pointer") Cc: Jiasheng Jiang Cc: Mark Brown Cc: James Liao Cc: Kevin Hilman Cc: Matthias Brugger Cc: Daniel Golle Link: https://lore.kernel.org/lkml/20220205014755.699603-1-linux@roeck-us.net/ Signed-off-by: Guenter Roeck Signed-off-by: Greg Kroah-Hartman commit 4a9bd1e6780fc59f81466ec3489d5ad535a37190 Author: Mike Marciniszyn Date: Sat Jan 15 18:02:35 2022 -0500 IB/hfi1: Fix AIP early init panic commit 5f8f55b92edd621f056bdf09e572092849fabd83 upstream. An early failure in hfi1_ipoib_setup_rn() can lead to the following panic: BUG: unable to handle kernel NULL pointer dereference at 00000000000001b0 PGD 0 P4D 0 Oops: 0002 [#1] SMP NOPTI Workqueue: events work_for_cpu_fn RIP: 0010:try_to_grab_pending+0x2b/0x140 Code: 1f 44 00 00 41 55 41 54 55 48 89 d5 53 48 89 fb 9c 58 0f 1f 44 00 00 48 89 c2 fa 66 0f 1f 44 00 00 48 89 55 00 40 84 f6 75 77 48 0f ba 2b 00 72 09 31 c0 5b 5d 41 5c 41 5d c3 48 89 df e8 6c RSP: 0018:ffffb6b3cf7cfa48 EFLAGS: 00010046 RAX: 0000000000000246 RBX: 00000000000001b0 RCX: 0000000000000000 RDX: 0000000000000246 RSI: 0000000000000000 RDI: 00000000000001b0 RBP: ffffb6b3cf7cfa70 R08: 0000000000000f09 R09: 0000000000000001 R10: 0000000000000000 R11: 0000000000000001 R12: 0000000000000000 R13: ffffb6b3cf7cfa90 R14: ffffffff9b2fbfc0 R15: ffff8a4fdf244690 FS: 0000000000000000(0000) GS:ffff8a527f400000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000000001b0 CR3: 00000017e2410003 CR4: 00000000007706f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: __cancel_work_timer+0x42/0x190 ? dev_printk_emit+0x4e/0x70 iowait_cancel_work+0x15/0x30 [hfi1] hfi1_ipoib_txreq_deinit+0x5a/0x220 [hfi1] ? dev_err+0x6c/0x90 hfi1_ipoib_netdev_dtor+0x15/0x30 [hfi1] hfi1_ipoib_setup_rn+0x10e/0x150 [hfi1] rdma_init_netdev+0x5a/0x80 [ib_core] ? hfi1_ipoib_free_rdma_netdev+0x20/0x20 [hfi1] ipoib_intf_init+0x6c/0x350 [ib_ipoib] ipoib_intf_alloc+0x5c/0xc0 [ib_ipoib] ipoib_add_one+0xbe/0x300 [ib_ipoib] add_client_context+0x12c/0x1a0 [ib_core] enable_device_and_get+0xdc/0x1d0 [ib_core] ib_register_device+0x572/0x6b0 [ib_core] rvt_register_device+0x11b/0x220 [rdmavt] hfi1_register_ib_device+0x6b4/0x770 [hfi1] do_init_one.isra.20+0x3e3/0x680 [hfi1] local_pci_probe+0x41/0x90 work_for_cpu_fn+0x16/0x20 process_one_work+0x1a7/0x360 ? create_worker+0x1a0/0x1a0 worker_thread+0x1cf/0x390 ? create_worker+0x1a0/0x1a0 kthread+0x116/0x130 ? kthread_flush_work_fn+0x10/0x10 ret_from_fork+0x1f/0x40 The panic happens in hfi1_ipoib_txreq_deinit() because there is a NULL deref when hfi1_ipoib_netdev_dtor() is called in this error case. hfi1_ipoib_txreq_init() and hfi1_ipoib_rxq_init() are self unwinding so fix by adjusting the error paths accordingly. Other changes: - hfi1_ipoib_free_rdma_netdev() is deleted including the free_netdev() since the netdev core code deletes calls free_netdev() - The switch to the accelerated entrances is moved to the success path. Cc: stable@vger.kernel.org Fixes: d99dc602e2a5 ("IB/hfi1: Add functions to transmit datagram ipoib packets") Link: https://lore.kernel.org/r/1642287756-182313-4-git-send-email-mike.marciniszyn@cornelisnetworks.com Reviewed-by: Dennis Dalessandro Signed-off-by: Mike Marciniszyn Signed-off-by: Jason Gunthorpe Signed-off-by: Greg Kroah-Hartman commit 5d40f1bdad3dd1a177f21a90ad4353c1ed40ba3a Author: Jordy Zomer Date: Sat Jan 29 16:06:04 2022 +0100 dma-buf: heaps: Fix potential spectre v1 gadget commit 92c4cfaee6872038563c5b6f2e8e613f9d84d47d upstream. It appears like nr could be a Spectre v1 gadget as it's supplied by a user and used as an array index. Prevent the contents of kernel memory from being leaked to userspace via speculative execution by using array_index_nospec. Signed-off-by: Jordy Zomer Fixes: c02a81fba74f ("dma-buf: Add dma-buf heaps framework") Cc: # v5.6+ Acked-by: John Stultz Signed-off-by: Sumit Semwal [sumits: added fixes and cc: stable tags] Link: https://patchwork.freedesktop.org/patch/msgid/20220129150604.3461652-1-jordy@pwning.systems Signed-off-by: Greg Kroah-Hartman commit 30de3bc099780232129c3737844ac37a809514a9 Author: Martin K. Petersen Date: Thu Feb 3 22:42:09 2022 -0500 block: bio-integrity: Advance seed correctly for larger interval sizes commit b13e0c71856817fca67159b11abac350e41289f5 upstream. Commit 309a62fa3a9e ("bio-integrity: bio_integrity_advance must update integrity seed") added code to update the integrity seed value when advancing a bio. However, it failed to take into account that the integrity interval might be larger than the 512-byte block layer sector size. This broke bio splitting on PI devices with 4KB logical blocks. The seed value should be advanced by bio_integrity_intervals() and not the number of sectors. Cc: Dmitry Monakhov Cc: stable@vger.kernel.org Fixes: 309a62fa3a9e ("bio-integrity: bio_integrity_advance must update integrity seed") Tested-by: Dmitry Ivanov Reported-by: Alexey Lyashkov Signed-off-by: Martin K. Petersen Link: https://lore.kernel.org/r/20220204034209.4193-1-martin.petersen@oracle.com Signed-off-by: Jens Axboe Signed-off-by: Greg Kroah-Hartman commit 352715593e81b917ce1b321e794549815b850134 Author: Lang Yu Date: Thu Feb 3 20:49:37 2022 -0800 mm/kmemleak: avoid scanning potential huge holes commit c10a0f877fe007021d70f9cada240f42adc2b5db upstream. When using devm_request_free_mem_region() and devm_memremap_pages() to add ZONE_DEVICE memory, if requested free mem region's end pfn were huge(e.g., 0x400000000), the node_end_pfn() will be also huge (see move_pfn_range_to_zone()). Thus it creates a huge hole between node_start_pfn() and node_end_pfn(). We found on some AMD APUs, amdkfd requested such a free mem region and created a huge hole. In such a case, following code snippet was just doing busy test_bit() looping on the huge hole. for (pfn = start_pfn; pfn < end_pfn; pfn++) { struct page *page = pfn_to_online_page(pfn); if (!page) continue; ... } So we got a soft lockup: watchdog: BUG: soft lockup - CPU#6 stuck for 26s! [bash:1221] CPU: 6 PID: 1221 Comm: bash Not tainted 5.15.0-custom #1 RIP: 0010:pfn_to_online_page+0x5/0xd0 Call Trace: ? kmemleak_scan+0x16a/0x440 kmemleak_write+0x306/0x3a0 ? common_file_perm+0x72/0x170 full_proxy_write+0x5c/0x90 vfs_write+0xb9/0x260 ksys_write+0x67/0xe0 __x64_sys_write+0x1a/0x20 do_syscall_64+0x3b/0xc0 entry_SYSCALL_64_after_hwframe+0x44/0xae I did some tests with the patch. (1) amdgpu module unloaded before the patch: real 0m0.976s user 0m0.000s sys 0m0.968s after the patch: real 0m0.981s user 0m0.000s sys 0m0.973s (2) amdgpu module loaded before the patch: real 0m35.365s user 0m0.000s sys 0m35.354s after the patch: real 0m1.049s user 0m0.000s sys 0m1.042s Link: https://lkml.kernel.org/r/20211108140029.721144-1-lang.yu@amd.com Signed-off-by: Lang Yu Acked-by: David Hildenbrand Acked-by: Catalin Marinas Cc: Oscar Salvador Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman commit 7053188ddba3f6e7402000c94496066fa700891e Author: Mike Rapoport Date: Thu Feb 3 20:49:29 2022 -0800 mm/pgtable: define pte_index so that preprocessor could recognize it commit 314c459a6fe0957b5885fbc65c53d51444092880 upstream. Since commit 974b9b2c68f3 ("mm: consolidate pte_index() and pte_offset_*() definitions") pte_index is a static inline and there is no define for it that can be recognized by the preprocessor. As a result, vm_insert_pages() uses slower loop over vm_insert_page() instead of insert_pages() that amortizes the cost of spinlock operations when inserting multiple pages. Link: https://lkml.kernel.org/r/20220111145457.20748-1-rppt@kernel.org Fixes: 974b9b2c68f3 ("mm: consolidate pte_index() and pte_offset_*() definitions") Signed-off-by: Mike Rapoport Reported-by: Christian Dietrich Reviewed-by: Khalid Aziz Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman commit bce7f5d74d74d6f97c8ce0a0dcb741f667ce68a5 Author: Pasha Tatashin Date: Thu Feb 3 20:49:10 2022 -0800 mm/debug_vm_pgtable: remove pte entry from the page table commit fb5222aae64fe25e5f3ebefde8214dcf3ba33ca5 upstream. Patch series "page table check fixes and cleanups", v5. This patch (of 4): The pte entry that is used in pte_advanced_tests() is never removed from the page table at the end of the test. The issue is detected by page_table_check, to repro compile kernel with the following configs: CONFIG_DEBUG_VM_PGTABLE=y CONFIG_PAGE_TABLE_CHECK=y CONFIG_PAGE_TABLE_CHECK_ENFORCED=y During the boot the following BUG is printed: debug_vm_pgtable: [debug_vm_pgtable ]: Validating architecture page table helpers ------------[ cut here ]------------ kernel BUG at mm/page_table_check.c:162! invalid opcode: 0000 [#1] PREEMPT SMP PTI CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.16.0-11413-g2c271fe77d52 #3 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.15.0-0-g2dd4b9b3f840-prebuilt.qemu.org 04/01/2014 ... The entry should be properly removed from the page table before the page is released to the free list. Link: https://lkml.kernel.org/r/20220131203249.2832273-1-pasha.tatashin@soleen.com Link: https://lkml.kernel.org/r/20220131203249.2832273-2-pasha.tatashin@soleen.com Fixes: a5c3b9ffb0f4 ("mm/debug_vm_pgtable: add tests validating advanced arch page table helpers") Signed-off-by: Pasha Tatashin Reviewed-by: Zi Yan Tested-by: Zi Yan Acked-by: David Rientjes Reviewed-by: Anshuman Khandual Cc: Paul Turner Cc: Wei Xu Cc: Greg Thelen Cc: Ingo Molnar Cc: Will Deacon Cc: Mike Rapoport Cc: Dave Hansen Cc: H. Peter Anvin Cc: Aneesh Kumar K.V Cc: Jiri Slaby Cc: Muchun Song Cc: Hugh Dickins Cc: [5.9+] Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman commit 2d83a7463d75661715616277f9664b2f0d6a513e Author: Uday Shankar Date: Thu Jan 20 12:17:37 2022 -0800 nvme-fabrics: fix state check in nvmf_ctlr_matches_baseopts() commit 6a51abdeb259a56d95f13cc67e3a0838bcda0377 upstream. Controller deletion/reset, immediately followed by or concurrent with a reconnect, is hard failing the connect attempt resulting in a complete loss of connectivity to the controller. In the connect request, fabrics looks for an existing controller with the same address components and aborts the connect if a controller already exists and the duplicate connect option isn't set. The match routine filters out controllers that are dead or dying, so they don't interfere with the new connect request. When NVME_CTRL_DELETING_NOIO was added, it missed updating the state filters in the nvmf_ctlr_matches_baseopts() routine. Thus, when in this new state, it's seen as a live controller and fails the connect request. Correct by adding the DELETING_NIO state to the match checks. Fixes: ecca390e8056 ("nvme: fix deadlock in disconnect during scan_work and/or ana_work") Cc: # v5.7+ Signed-off-by: Uday Shankar Reviewed-by: James Smart Reviewed-by: Sagi Grimberg Signed-off-by: Christoph Hellwig Signed-off-by: Greg Kroah-Hartman commit a0c73dbdd197cc78289cd56a9df8d00f53dcfada Author: Aun-Ali Zaidi Date: Sat Jan 29 05:49:55 2022 +0000 drm/amd/display: Force link_rate as LINK_RATE_RBR2 for 2018 15" Apple Retina panels commit 30fbce374745a9c6af93c775a5ac49a97f822fda upstream. The eDP link rate reported by the DP_MAX_LINK_RATE dpcd register (0xa) is contradictory to the highest rate supported reported by EDID (0xc = LINK_RATE_RBR2). The effects of this compounded with commit '4a8ca46bae8a ("drm/amd/display: Default max bpc to 16 for eDP")' results in no display modes being found and a dark panel. For now, simply force the maximum supported link rate for the eDP attached 2018 15" Apple Retina panels. Additionally, we must also check the firmware revision since the device ID reported by the DPCD is identical to that of the more capable 16,1, incorrectly quirking it. We also use said firmware check to quirk the refreshed 15,1 models with Vega graphics as they use a slightly newer firmware version. Tested-by: Aun-Ali Zaidi Reviewed-by: Harry Wentland Signed-off-by: Aun-Ali Zaidi Signed-off-by: Aditya Garg Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman commit f071d9fa857582d7bd77f4906691f73d3edeab73 Author: Nick Lopez Date: Sat Jan 22 01:19:06 2022 -0700 drm/nouveau: fix off by one in BIOS boundary checking commit 1b777d4d9e383d2744fc9b3a09af6ec1893c8b1a upstream. Bounds checking when parsing init scripts embedded in the BIOS reject access to the last byte. This causes driver initialization to fail on Apple eMac's with GeForce 2 MX GPUs, leaving the system with no working console. This is probably only seen on OpenFirmware machines like PowerPC Macs because the BIOS image provided by OF is only the used parts of the ROM, not a power-of-two blocks read from PCI directly so PCs always have empty bytes at the end that are never accessed. Signed-off-by: Nick Lopez Fixes: 4d4e9907ff572 ("drm/nouveau/bios: guard against out-of-bounds accesses to image") Cc: # v4.10+ Reviewed-by: Ilia Mirkin Reviewed-by: Karol Herbst Signed-off-by: Karol Herbst Link: https://patchwork.freedesktop.org/patch/msgid/20220122081906.2633061-1-github@glowingmonkey.org Signed-off-by: Greg Kroah-Hartman commit 32747e01436aac8ef93fe85b5b523b4f3b52f040 Author: Shin'ichiro Kawasaki Date: Thu Jan 20 20:09:16 2022 +0900 btrfs: fix deadlock between quota disable and qgroup rescan worker commit e804861bd4e69cc5fe1053eedcb024982dde8e48 upstream. Quota disable ioctl starts a transaction before waiting for the qgroup rescan worker completes. However, this wait can be infinite and results in deadlock because of circular dependency among the quota disable ioctl, the qgroup rescan worker and the other task with transaction such as block group relocation task. The deadlock happens with the steps following: 1) Task A calls ioctl to disable quota. It starts a transaction and waits for qgroup rescan worker completes. 2) Task B such as block group relocation task starts a transaction and joins to the transaction that task A started. Then task B commits to the transaction. In this commit, task B waits for a commit by task A. 3) Task C as the qgroup rescan worker starts its job and starts a transaction. In this transaction start, task C waits for completion of the transaction that task A started and task B committed. This deadlock was found with fstests test case btrfs/115 and a zoned null_blk device. The test case enables and disables quota, and the block group reclaim was triggered during the quota disable by chance. The deadlock was also observed by running quota enable and disable in parallel with 'btrfs balance' command on regular null_blk devices. An example report of the deadlock: [372.469894] INFO: task kworker/u16:6:103 blocked for more than 122 seconds. [372.479944] Not tainted 5.16.0-rc8 #7 [372.485067] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [372.493898] task:kworker/u16:6 state:D stack: 0 pid: 103 ppid: 2 flags:0x00004000 [372.503285] Workqueue: btrfs-qgroup-rescan btrfs_work_helper [btrfs] [372.510782] Call Trace: [372.514092] [372.521684] __schedule+0xb56/0x4850 [372.530104] ? io_schedule_timeout+0x190/0x190 [372.538842] ? lockdep_hardirqs_on+0x7e/0x100 [372.547092] ? _raw_spin_unlock_irqrestore+0x3e/0x60 [372.555591] schedule+0xe0/0x270 [372.561894] btrfs_commit_transaction+0x18bb/0x2610 [btrfs] [372.570506] ? btrfs_apply_pending_changes+0x50/0x50 [btrfs] [372.578875] ? free_unref_page+0x3f2/0x650 [372.585484] ? finish_wait+0x270/0x270 [372.591594] ? release_extent_buffer+0x224/0x420 [btrfs] [372.599264] btrfs_qgroup_rescan_worker+0xc13/0x10c0 [btrfs] [372.607157] ? lock_release+0x3a9/0x6d0 [372.613054] ? btrfs_qgroup_account_extent+0xda0/0xda0 [btrfs] [372.620960] ? do_raw_spin_lock+0x11e/0x250 [372.627137] ? rwlock_bug.part.0+0x90/0x90 [372.633215] ? lock_is_held_type+0xe4/0x140 [372.639404] btrfs_work_helper+0x1ae/0xa90 [btrfs] [372.646268] process_one_work+0x7e9/0x1320 [372.652321] ? lock_release+0x6d0/0x6d0 [372.658081] ? pwq_dec_nr_in_flight+0x230/0x230 [372.664513] ? rwlock_bug.part.0+0x90/0x90 [372.670529] worker_thread+0x59e/0xf90 [372.676172] ? process_one_work+0x1320/0x1320 [372.682440] kthread+0x3b9/0x490 [372.687550] ? _raw_spin_unlock_irq+0x24/0x50 [372.693811] ? set_kthread_struct+0x100/0x100 [372.700052] ret_from_fork+0x22/0x30 [372.705517] [372.709747] INFO: task btrfs-transacti:2347 blocked for more than 123 seconds. [372.729827] Not tainted 5.16.0-rc8 #7 [372.745907] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [372.767106] task:btrfs-transacti state:D stack: 0 pid: 2347 ppid: 2 flags:0x00004000 [372.787776] Call Trace: [372.801652] [372.812961] __schedule+0xb56/0x4850 [372.830011] ? io_schedule_timeout+0x190/0x190 [372.852547] ? lockdep_hardirqs_on+0x7e/0x100 [372.871761] ? _raw_spin_unlock_irqrestore+0x3e/0x60 [372.886792] schedule+0xe0/0x270 [372.901685] wait_current_trans+0x22c/0x310 [btrfs] [372.919743] ? btrfs_put_transaction+0x3d0/0x3d0 [btrfs] [372.938923] ? finish_wait+0x270/0x270 [372.959085] ? join_transaction+0xc75/0xe30 [btrfs] [372.977706] start_transaction+0x938/0x10a0 [btrfs] [372.997168] transaction_kthread+0x19d/0x3c0 [btrfs] [373.013021] ? btrfs_cleanup_transaction.isra.0+0xfc0/0xfc0 [btrfs] [373.031678] kthread+0x3b9/0x490 [373.047420] ? _raw_spin_unlock_irq+0x24/0x50 [373.064645] ? set_kthread_struct+0x100/0x100 [373.078571] ret_from_fork+0x22/0x30 [373.091197] [373.105611] INFO: task btrfs:3145 blocked for more than 123 seconds. [373.114147] Not tainted 5.16.0-rc8 #7 [373.120401] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [373.130393] task:btrfs state:D stack: 0 pid: 3145 ppid: 3141 flags:0x00004000 [373.140998] Call Trace: [373.145501] [373.149654] __schedule+0xb56/0x4850 [373.155306] ? io_schedule_timeout+0x190/0x190 [373.161965] ? lockdep_hardirqs_on+0x7e/0x100 [373.168469] ? _raw_spin_unlock_irqrestore+0x3e/0x60 [373.175468] schedule+0xe0/0x270 [373.180814] wait_for_commit+0x104/0x150 [btrfs] [373.187643] ? test_and_set_bit+0x20/0x20 [btrfs] [373.194772] ? kmem_cache_free+0x124/0x550 [373.201191] ? btrfs_put_transaction+0x69/0x3d0 [btrfs] [373.208738] ? finish_wait+0x270/0x270 [373.214704] ? __btrfs_end_transaction+0x347/0x7b0 [btrfs] [373.222342] btrfs_commit_transaction+0x44d/0x2610 [btrfs] [373.230233] ? join_transaction+0x255/0xe30 [btrfs] [373.237334] ? btrfs_record_root_in_trans+0x4d/0x170 [btrfs] [373.245251] ? btrfs_apply_pending_changes+0x50/0x50 [btrfs] [373.253296] relocate_block_group+0x105/0xc20 [btrfs] [373.260533] ? mutex_lock_io_nested+0x1270/0x1270 [373.267516] ? btrfs_wait_nocow_writers+0x85/0x180 [btrfs] [373.275155] ? merge_reloc_roots+0x710/0x710 [btrfs] [373.283602] ? btrfs_wait_ordered_extents+0xd30/0xd30 [btrfs] [373.291934] ? kmem_cache_free+0x124/0x550 [373.298180] btrfs_relocate_block_group+0x35c/0x930 [btrfs] [373.306047] btrfs_relocate_chunk+0x85/0x210 [btrfs] [373.313229] btrfs_balance+0x12f4/0x2d20 [btrfs] [373.320227] ? lock_release+0x3a9/0x6d0 [373.326206] ? btrfs_relocate_chunk+0x210/0x210 [btrfs] [373.333591] ? lock_is_held_type+0xe4/0x140 [373.340031] ? rcu_read_lock_sched_held+0x3f/0x70 [373.346910] btrfs_ioctl_balance+0x548/0x700 [btrfs] [373.354207] btrfs_ioctl+0x7f2/0x71b0 [btrfs] [373.360774] ? lockdep_hardirqs_on_prepare+0x410/0x410 [373.367957] ? lockdep_hardirqs_on_prepare+0x410/0x410 [373.375327] ? btrfs_ioctl_get_supported_features+0x20/0x20 [btrfs] [373.383841] ? find_held_lock+0x2c/0x110 [373.389993] ? lock_release+0x3a9/0x6d0 [373.395828] ? mntput_no_expire+0xf7/0xad0 [373.402083] ? lock_is_held_type+0xe4/0x140 [373.408249] ? vfs_fileattr_set+0x9f0/0x9f0 [373.414486] ? selinux_file_ioctl+0x349/0x4e0 [373.420938] ? trace_raw_output_lock+0xb4/0xe0 [373.427442] ? selinux_inode_getsecctx+0x80/0x80 [373.434224] ? lockdep_hardirqs_on+0x7e/0x100 [373.440660] ? force_qs_rnp+0x2a0/0x6b0 [373.446534] ? lock_is_held_type+0x9b/0x140 [373.452763] ? __blkcg_punt_bio_submit+0x1b0/0x1b0 [373.459732] ? security_file_ioctl+0x50/0x90 [373.466089] __x64_sys_ioctl+0x127/0x190 [373.472022] do_syscall_64+0x3b/0x90 [373.477513] entry_SYSCALL_64_after_hwframe+0x44/0xae [373.484823] RIP: 0033:0x7f8f4af7e2bb [373.490493] RSP: 002b:00007ffcbf936178 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 [373.500197] RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 00007f8f4af7e2bb [373.509451] RDX: 00007ffcbf936220 RSI: 00000000c4009420 RDI: 0000000000000003 [373.518659] RBP: 00007ffcbf93774a R08: 0000000000000013 R09: 00007f8f4b02d4e0 [373.527872] R10: 00007f8f4ae87740 R11: 0000000000000246 R12: 0000000000000001 [373.537222] R13: 00007ffcbf936220 R14: 0000000000000000 R15: 0000000000000002 [373.546506] [373.550878] INFO: task btrfs:3146 blocked for more than 123 seconds. [373.559383] Not tainted 5.16.0-rc8 #7 [373.565748] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [373.575748] task:btrfs state:D stack: 0 pid: 3146 ppid: 2168 flags:0x00000000 [373.586314] Call Trace: [373.590846] [373.595121] __schedule+0xb56/0x4850 [373.600901] ? __lock_acquire+0x23db/0x5030 [373.607176] ? io_schedule_timeout+0x190/0x190 [373.613954] schedule+0xe0/0x270 [373.619157] schedule_timeout+0x168/0x220 [373.625170] ? usleep_range_state+0x150/0x150 [373.631653] ? mark_held_locks+0x9e/0xe0 [373.637767] ? do_raw_spin_lock+0x11e/0x250 [373.643993] ? lockdep_hardirqs_on_prepare+0x17b/0x410 [373.651267] ? _raw_spin_unlock_irq+0x24/0x50 [373.657677] ? lockdep_hardirqs_on+0x7e/0x100 [373.664103] wait_for_completion+0x163/0x250 [373.670437] ? bit_wait_timeout+0x160/0x160 [373.676585] btrfs_quota_disable+0x176/0x9a0 [btrfs] [373.683979] ? btrfs_quota_enable+0x12f0/0x12f0 [btrfs] [373.691340] ? down_write+0xd0/0x130 [373.696880] ? down_write_killable+0x150/0x150 [373.703352] btrfs_ioctl+0x3945/0x71b0 [btrfs] [373.710061] ? find_held_lock+0x2c/0x110 [373.716192] ? lock_release+0x3a9/0x6d0 [373.722047] ? __handle_mm_fault+0x23cd/0x3050 [373.728486] ? btrfs_ioctl_get_supported_features+0x20/0x20 [btrfs] [373.737032] ? set_pte+0x6a/0x90 [373.742271] ? do_raw_spin_unlock+0x55/0x1f0 [373.748506] ? lock_is_held_type+0xe4/0x140 [373.754792] ? vfs_fileattr_set+0x9f0/0x9f0 [373.761083] ? selinux_file_ioctl+0x349/0x4e0 [373.767521] ? selinux_inode_getsecctx+0x80/0x80 [373.774247] ? __up_read+0x182/0x6e0 [373.780026] ? count_memcg_events.constprop.0+0x46/0x60 [373.787281] ? up_write+0x460/0x460 [373.792932] ? security_file_ioctl+0x50/0x90 [373.799232] __x64_sys_ioctl+0x127/0x190 [373.805237] do_syscall_64+0x3b/0x90 [373.810947] entry_SYSCALL_64_after_hwframe+0x44/0xae [373.818102] RIP: 0033:0x7f1383ea02bb [373.823847] RSP: 002b:00007fffeb4d71f8 EFLAGS: 00000202 ORIG_RAX: 0000000000000010 [373.833641] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f1383ea02bb [373.842961] RDX: 00007fffeb4d7210 RSI: 00000000c0109428 RDI: 0000000000000003 [373.852179] RBP: 0000000000000003 R08: 0000000000000003 R09: 0000000000000078 [373.861408] R10: 00007f1383daec78 R11: 0000000000000202 R12: 00007fffeb4d874a [373.870647] R13: 0000000000493099 R14: 0000000000000001 R15: 0000000000000000 [373.879838] [373.884018] Showing all locks held in the system: [373.894250] 3 locks held by kworker/4:1/58: [373.900356] 1 lock held by khungtaskd/63: [373.906333] #0: ffffffff8945ff60 (rcu_read_lock){....}-{1:2}, at: debug_show_all_locks+0x53/0x260 [373.917307] 3 locks held by kworker/u16:6/103: [373.923938] #0: ffff888127b4f138 ((wq_completion)btrfs-qgroup-rescan){+.+.}-{0:0}, at: process_one_work+0x712/0x1320 [373.936555] #1: ffff88810b817dd8 ((work_completion)(&work->normal_work)){+.+.}-{0:0}, at: process_one_work+0x73f/0x1320 [373.951109] #2: ffff888102dd4650 (sb_internal#2){.+.+}-{0:0}, at: btrfs_qgroup_rescan_worker+0x1f6/0x10c0 [btrfs] [373.964027] 2 locks held by less/1803: [373.969982] #0: ffff88813ed56098 (&tty->ldisc_sem){++++}-{0:0}, at: tty_ldisc_ref_wait+0x24/0x80 [373.981295] #1: ffffc90000b3b2e8 (&ldata->atomic_read_lock){+.+.}-{3:3}, at: n_tty_read+0x9e2/0x1060 [373.992969] 1 lock held by btrfs-transacti/2347: [373.999893] #0: ffff88813d4887a8 (&fs_info->transaction_kthread_mutex){+.+.}-{3:3}, at: transaction_kthread+0xe3/0x3c0 [btrfs] [374.015872] 3 locks held by btrfs/3145: [374.022298] #0: ffff888102dd4460 (sb_writers#18){.+.+}-{0:0}, at: btrfs_ioctl_balance+0xc3/0x700 [btrfs] [374.034456] #1: ffff88813d48a0a0 (&fs_info->reclaim_bgs_lock){+.+.}-{3:3}, at: btrfs_balance+0xfe5/0x2d20 [btrfs] [374.047646] #2: ffff88813d488838 (&fs_info->cleaner_mutex){+.+.}-{3:3}, at: btrfs_relocate_block_group+0x354/0x930 [btrfs] [374.063295] 4 locks held by btrfs/3146: [374.069647] #0: ffff888102dd4460 (sb_writers#18){.+.+}-{0:0}, at: btrfs_ioctl+0x38b1/0x71b0 [btrfs] [374.081601] #1: ffff88813d488bb8 (&fs_info->subvol_sem){+.+.}-{3:3}, at: btrfs_ioctl+0x38fd/0x71b0 [btrfs] [374.094283] #2: ffff888102dd4650 (sb_internal#2){.+.+}-{0:0}, at: btrfs_quota_disable+0xc8/0x9a0 [btrfs] [374.106885] #3: ffff88813d489800 (&fs_info->qgroup_ioctl_lock){+.+.}-{3:3}, at: btrfs_quota_disable+0xd5/0x9a0 [btrfs] [374.126780] ============================================= To avoid the deadlock, wait for the qgroup rescan worker to complete before starting the transaction for the quota disable ioctl. Clear BTRFS_FS_QUOTA_ENABLE flag before the wait and the transaction to request the worker to complete. On transaction start failure, set the BTRFS_FS_QUOTA_ENABLE flag again. These BTRFS_FS_QUOTA_ENABLE flag changes can be done safely since the function btrfs_quota_disable is not called concurrently because of fs_info->subvol_sem. Also check the BTRFS_FS_QUOTA_ENABLE flag in qgroup_rescan_init to avoid another qgroup rescan worker to start after the previous qgroup worker completed. CC: stable@vger.kernel.org # 5.4+ Suggested-by: Nikolay Borisov Reviewed-by: Filipe Manana Signed-off-by: Shin'ichiro Kawasaki Signed-off-by: David Sterba Signed-off-by: Greg Kroah-Hartman commit aa5d406153c53d12e1c4a09f657a3b1e55220ef2 Author: Christian Lachner Date: Sat Jan 29 12:32:43 2022 +0100 ALSA: hda/realtek: Fix silent output on Gigabyte X570 Aorus Xtreme after reboot from Windows commit ea3541961376f733373839cc90493aafa8a7f733 upstream. This commit switches the Gigabyte X570 Aorus Xtreme from using the ALC1220_FIXUP_CLEVO_P950 to the ALC1220_FIXUP_GB_X570 quirk. This fixes the no-audio after reboot from windows problem. BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=205275 Signed-off-by: Christian Lachner Cc: Link: https://lore.kernel.org/r/20220129113243.93068-4-gladiac@gmail.com Signed-off-by: Takashi Iwai Signed-off-by: Greg Kroah-Hartman commit d4aa3a98596f6d6968881942b9b70cbd1fffae6d Author: Christian Lachner Date: Sat Jan 29 12:32:42 2022 +0100 ALSA: hda/realtek: Fix silent output on Gigabyte X570S Aorus Master (newer chipset) commit 41a8601302ecbe704ac970552c33dc942300fc37 upstream. Newer versions of the X570 Master come with a newer revision of the mainboard chipset - the X570S. These boards have the same ALC1220 codec but seem to initialize the codec with a different parameter in Coef 0x7 which causes the output audio to be very low. We therefore write a known-good value to Coef 0x7 to fix that. As the value is the exact same as on the other X570(non-S) boards the same quirk-function can be shared between both generations. This commit adds the Gigabyte X570S Aorus Master to the list of boards using the ALC1220_FIXUP_GB_X570 quirk. This fixes both, the silent output and the no-audio after reboot from windows problems. This work has been tested by the folks over at the level1techs forum here: https://forum.level1techs.com/t/has-anybody-gotten-audio-working-in-linux-on-aorus-x570-master/154072 Signed-off-by: Christian Lachner Cc: Link: https://lore.kernel.org/r/20220129113243.93068-3-gladiac@gmail.com Signed-off-by: Takashi Iwai Signed-off-by: Greg Kroah-Hartman commit 3a8a8072e32be002804cf1d029a2eef8c61b2fe0 Author: Christian Lachner Date: Sat Jan 29 12:32:41 2022 +0100 ALSA: hda/realtek: Add missing fixup-model entry for Gigabyte X570 ALC1220 quirks commit 63394a16086fc2152869d7902621e2525e14bc40 upstream. The initial commit of the new Gigabyte X570 ALC1220 quirks lacked the fixup-model entry in alc882_fixup_models[]. It seemed not to cause any ill effects but for completeness sake this commit makes up for that. Signed-off-by: Christian Lachner Cc: Link: https://lore.kernel.org/r/20220129113243.93068-2-gladiac@gmail.com Signed-off-by: Takashi Iwai Signed-off-by: Greg Kroah-Hartman commit 532cde962f5f1a3963729ed748f858ca5baddd05 Author: Albert Geantă Date: Mon Jan 31 03:05:23 2022 +0200 ALSA: hda/realtek: Add quirk for ASUS GU603 commit 94db9cc8f8fa2d5426ce79ec4ca16028f7084224 upstream. The ASUS GU603 (Zephyrus M16 - SSID 1043:16b2) requires a quirk similar to other ASUS devices for correctly routing the 4 integrated speakers. This fixes it by adding a corresponding quirk entry, which connects the bass speakers to the proper DAC. Signed-off-by: Albert Geantă Cc: Link: https://lore.kernel.org/r/20220131010523.546386-1-albertgeanta@gmail.com Signed-off-by: Takashi Iwai Signed-off-by: Greg Kroah-Hartman commit 410f231fd70c891469ff7c7c76fcd59a86b29a65 Author: Takashi Iwai Date: Mon Jan 31 08:57:38 2022 +0100 ALSA: hda: realtek: Fix race at concurrent COEF updates commit b837a9f5ab3bdfab9233c9f98a6bef717673a3e5 upstream. The COEF access is done with two steps: setting the index then read or write the data. When multiple COEF accesses are performed concurrently, the index and data might be paired unexpectedly. In most cases, this isn't a big problem as the COEF setup is done at the initialization, but some dynamic changes like the mute LED may hit such a race. For avoiding the racy COEF accesses, this patch introduces a new mutex coef_mutex to alc_spec, and wrap the COEF accessing functions with it. Reported-by: Alexander Sergeyev Cc: Link: https://lore.kernel.org/r/20220111195229.a77wrpjclqwrx4bx@localhost.localdomain Link: https://lore.kernel.org/r/20220131075738.24323-1-tiwai@suse.de Signed-off-by: Takashi Iwai Signed-off-by: Greg Kroah-Hartman commit a7de1002135cf94367748ffc695a29812d7633b5 Author: Takashi Iwai Date: Wed Jan 26 15:50:11 2022 +0100 ALSA: hda: Fix UAF of leds class devs at unbinding commit 549f8ffc7b2f7561bea7f90930b6c5104318e87b upstream. The LED class devices that are created by HD-audio codec drivers are registered via devm_led_classdev_register() and associated with the HD-audio codec device. Unfortunately, it turned out that the devres release doesn't work for this case; namely, since the codec resource release happens before the devm call chain, it triggers a NULL dereference or a UAF for a stale set_brightness_delay callback. For fixing the bug, this patch changes the LED class device register and unregister in a manual manner without devres, keeping the instances in hda_gen_spec. Reported-by: Alexander Sergeyev Cc: Link: https://lore.kernel.org/r/20220111195229.a77wrpjclqwrx4bx@localhost.localdomain Link: https://lore.kernel.org/r/20220126145011.16728-1-tiwai@suse.de Signed-off-by: Takashi Iwai Signed-off-by: Greg Kroah-Hartman commit 470bbb9cbd8fe115d844222317666f672d32c1fc Author: Jonas Hahnfeld Date: Mon Jan 31 19:35:16 2022 +0100 ALSA: usb-audio: Correct quirk for VF0770 commit 4ee02e20893d2f9e951c7888f2284fa608ddaa35 upstream. This device provides both audio and video. The original quirk added in commit 48827e1d6af5 ("ALSA: usb-audio: Add quirk for VF0770") used USB_DEVICE to match the vendor and product ID. Depending on module order, if snd-usb-audio was asked first, it would match the entire device and uvcvideo wouldn't get to see it. Change the matching to USB_AUDIO_DEVICE to restore uvcvideo matching in all cases. Fixes: 48827e1d6af5 ("ALSA: usb-audio: Add quirk for VF0770") Reported-by: Jukka Heikintalo Tested-by: Jukka Heikintalo Reported-by: Paweł Susicki Tested-by: Paweł Susicki Cc: # 5.4, 5.10, 5.14, 5.15 Signed-off-by: Jonas Hahnfeld Link: https://lore.kernel.org/r/20220131183516.61191-1-hahnjo@hahnjo.de Signed-off-by: Takashi Iwai Signed-off-by: Greg Kroah-Hartman commit 6877f87579ed830f9ff6d478539074f035d04bfb Author: Mark Brown Date: Mon Jan 24 15:32:53 2022 +0000 ASoC: ops: Reject out of bounds values in snd_soc_put_xr_sx() commit 4cf28e9ae6e2e11a044be1bcbcfa1b0d8675fe4d upstream. We don't currently validate that the values being set are within the range we advertised to userspace as being valid, do so and reject any values that are out of range. Signed-off-by: Mark Brown Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20220124153253.3548853-4-broonie@kernel.org Signed-off-by: Mark Brown Signed-off-by: Greg Kroah-Hartman commit 038f8b7caa74d29e020949a43ca368c93f6b29b9 Author: Mark Brown Date: Mon Jan 24 15:32:52 2022 +0000 ASoC: ops: Reject out of bounds values in snd_soc_put_volsw_sx() commit 4f1e50d6a9cf9c1b8c859d449b5031cacfa8404e upstream. We don't currently validate that the values being set are within the range we advertised to userspace as being valid, do so and reject any values that are out of range. Signed-off-by: Mark Brown Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20220124153253.3548853-3-broonie@kernel.org Signed-off-by: Mark Brown Signed-off-by: Greg Kroah-Hartman commit a9394f21fba027147bf275b083c77955864c366a Author: Mark Brown Date: Mon Jan 24 15:32:51 2022 +0000 ASoC: ops: Reject out of bounds values in snd_soc_put_volsw() commit 817f7c9335ec01e0f5e8caffc4f1dcd5e458a4c0 upstream. We don't currently validate that the values being set are within the range we advertised to userspace as being valid, do so and reject any values that are out of range. Signed-off-by: Mark Brown Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20220124153253.3548853-2-broonie@kernel.org Signed-off-by: Mark Brown Signed-off-by: Greg Kroah-Hartman commit 0ff6b805069506318fb7385304b864d6694d9363 Author: Paul Moore Date: Thu Jan 13 18:54:38 2022 -0500 audit: improve audit queue handling when "audit=1" on cmdline commit f26d04331360d42dbd6b58448bd98e4edbfbe1c5 upstream. When an admin enables audit at early boot via the "audit=1" kernel command line the audit queue behavior is slightly different; the audit subsystem goes to greater lengths to avoid dropping records, which unfortunately can result in problems when the audit daemon is forcibly stopped for an extended period of time. This patch makes a number of changes designed to improve the audit queuing behavior so that leaving the audit daemon in a stopped state for an extended period does not cause a significant impact to the system. - kauditd_send_queue() is now limited to looping through the passed queue only once per call. This not only prevents the function from looping indefinitely when records are returned to the current queue, it also allows any recovery handling in kauditd_thread() to take place when kauditd_send_queue() returns. - Transient netlink send errors seen as -EAGAIN now cause the record to be returned to the retry queue instead of going to the hold queue. The intention of the hold queue is to store, perhaps for an extended period of time, the events which led up to the audit daemon going offline. The retry queue remains a temporary queue intended to protect against transient issues between the kernel and the audit daemon. - The retry queue is now limited by the audit_backlog_limit setting, the same as the other queues. This allows admins to bound the size of all of the audit queues on the system. - kauditd_rehold_skb() now returns records to the end of the hold queue to ensure ordering is preserved in the face of recent changes to kauditd_send_queue(). Cc: stable@vger.kernel.org Fixes: 5b52330bbfe63 ("audit: fix auditd/kernel connection state tracking") Fixes: f4b3ee3c85551 ("audit: improve robustness of the audit queue handling") Reported-by: Gaosheng Cui Tested-by: Gaosheng Cui Reviewed-by: Richard Guy Briggs Signed-off-by: Paul Moore Signed-off-by: Greg Kroah-Hartman commit f446089a268c8fc6908488e991d28a9b936293db Author: Vratislav Bendel Date: Wed Feb 2 12:25:11 2022 +0100 selinux: fix double free of cond_list on error paths commit 186edf7e368c40d06cf727a1ad14698ea67b74ad upstream. On error path from cond_read_list() and duplicate_policydb_cond_list() the cond_list_destroy() gets called a second time in caller functions, resulting in NULL pointer deref. Fix this by resetting the cond_list_len to 0 in cond_list_destroy(), making subsequent calls a noop. Also consistently reset the cond_list pointer to NULL after freeing. Cc: stable@vger.kernel.org Signed-off-by: Vratislav Bendel [PM: fix line lengths in the description] Signed-off-by: Paul Moore Signed-off-by: Greg Kroah-Hartman